Copper Talk » Product Reviews » Antennas » Change A99 from 1/2 to 3/4 wave « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Danusee
Member
Username: Danusee

Post Number: 79
Registered: 10-2004
Posted on Friday, August 23, 2013 - 9:00 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

It is just a thought. If a person added length to the A99 would it tune out at the 3/4 wave length? I think I have the material to do it. Also I could tie off about 3/4 the way up with nylon string. If that worked it would be one bad antenna. Have you ever heard of or tried this? Please give me your opinion.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dale
Senior Member
Username: Dale

Post Number: 1954
Registered: 12-2002
Posted on Sunday, August 25, 2013 - 9:14 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

adding lenth will change the resonance of the
antenna. or making it tune for 12 meters.
now you MIGHT be able to put a 102 whip on
top then you,ll HAVE to retune the rings on the bottom then maybe it might work.
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
Top of pagePrevious messageNext messageBottom of page Link to this message

Danusee
Member
Username: Danusee

Post Number: 80
Registered: 10-2004
Posted on Monday, August 26, 2013 - 6:32 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I read where on a 3/4 wave antenna the feed point will be out of phase. Also above a .64 wave length the pattern becomes distorted. I am off work for a few days and was looking for a project. Probably not this one. I have a Imax 2000. The best I have been able to do is one 18' radial (electric fence wire to nylon rope) in the directon I talk. Man it liked that! I get almost no swr movement on my needle over such a long range you would think my meter was broke. My tuning ring is about 3/4 the way up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech833
Moderator
Username: Tech833

Post Number: 2263
Registered: 8-2002
Posted on Tuesday, August 27, 2013 - 9:58 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The A99 is already a 3/4 wave antenna (electrically) with the first 1/4 wave taken up in the coil at the base.

A full length 3/4 wave antenna will cancel 1/2 of it's own signal since the first and second quarter waves of the antenna are at opposing phase angles. The second and third 1/4 wave lengths are at correct angles. That means, a full length 3/4 wave antenna will have half the gain of a half wave antenna. In essence, 3 dB LESS gain than an unmodified A99.

See the "Antron 99 Exposed" article for the schematic and pictures of the antenna from the inside.
Your radio 'Mythbuster' since 1998
Top of pagePrevious messageNext messageBottom of page Link to this message

Danusee
Member
Username: Danusee

Post Number: 81
Registered: 10-2004
Posted on Wednesday, August 28, 2013 - 9:08 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well that was interesting. Thanks Tech833.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: