| Author |
Message |
    
Tech808
Moderator
Username: Tech808
Post Number: 9706
Registered: 8-2002
| | Posted on Monday, April 10, 2006 - 10:17 am: | 
|
The Copper Forummaster needs your HELP/FEEDBACK!
The Forummaster needs to know how many of you will need Ham Radio Equipment Microphone Jumper Cords that will connect to the JCD-201M and then connect to your Ham Equipment.
PLEASE look at the CHART below and let us know WHAT type of Connector ie: MOTOROLA ~ TRS ~ YAESU ~ ICOM ~ KENWOOD you will need and for WHAT Brand/Make of Radio shown on the CHART below.
NOTE!
Or Let us know if you will need a 8 Pin Microphone Connector for a ICOM / KENWOOD / YAESU or other brand of radio.
You would then need to supply the Copper Tech with the Microphone Wiring Pinout for your radio when you place your order if you would want the Copper Tech to do the wiring for you.
PLEASE post and let us know how many you would need of each connector type so that he will have an idea of how many to order with the next shipment of the JCD-201m Microphones.
Thank you in advance for your help.
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Tech808
Moderator
Username: Tech808
Post Number: 9706
Registered: 8-2002
| | Posted on Monday, April 10, 2006 - 10:23 am: |
|
I will need QTY = (2) of the YAESU Modular plug type jumper cords shown above.
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Tech833
Moderator
Username: Tech833
Post Number: 1305
Registered: 8-2002
| | Posted on Tuesday, April 11, 2006 - 10:18 am: |
|
Lon,
Those plugs pictured (except the Yaesu and CB) are for VHF/UHF portable (handheld) radios. Ham HF radios usually have the 8 pin round connectors. The new Yaesu HF radios use the 3 pin XLR connectors.
If I were to purchase one of those mics, I would need an 8 pin Kenwood plug. |
Tech808
Moderator
Username: Tech808
Post Number: 9717
Registered: 8-2002
| | Posted on Tuesday, April 11, 2006 - 6:30 pm: |
|
Paul,
Thanks, I have edited my post above and added:
NOTE!
Or Let us know if you will need a 8 Pin Microphone Connector for a ICOM / KENWOOD / YAESU or other brand of radio.
You would then need to supply the Copper Tech with the Microphone Wiring Pinout for your radio when you place your order if you would want the Copper Tech to do the wiring for you.
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Hyperno_1979
Junior Member
Username: Hyperno_1979
Post Number: 36
Registered: 12-2005
| | Posted on Saturday, April 15, 2006 - 9:35 am: |
|
Lonnie,
Possible for 4 pin Kenwood (TS 820S) and also 4 pin Yaesu (FT 7)? I also am enquiring about others but will sort that out on voice chat ( a lot quicker and easier). ( Hint Hint).
Cheers & Beers,
Bob CEF703. |
Tech808
Moderator
Username: Tech808
Post Number: 9749
Registered: 8-2002
| | Posted on Saturday, April 15, 2006 - 10:07 am: |
|
Hypern9_1979,
YES!
Just got your questions answered for you in the Copper Voice Chat. 
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Wayne
Member
Username: Wayne
Post Number: 68
Registered: 12-2001
| | Posted on Saturday, August 13, 2011 - 7:44 pm: |
|
I have a FT 950 I also have a JD 201 Mic will this mic work with this radio,if so will Copper have the cable for this project Thanks Wayne KE5VDK |
Dale
Senior Member
Username: Dale
Post Number: 1903
Registered: 12-2002
| | Posted on Wednesday, December 05, 2012 - 12:34 pm: |
|
does this mic come with 2 cords?
if i was to order one id definately want
1 4pin cobra type
2/8pin
this is if it has/come with two cords. if not where
could i get another cord
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Lou
Junior Member
Username: Lou
Post Number: 24
Registered: 7-2017
| | Posted on Thursday, September 17, 2020 - 7:53 pm: |
|
I just orderd the JCD-201-M today,i want to use it on my anytone6666 radio. I wanted to have it wired for that radio and thay said coppers will NOT wire for that radio. What do i do now? STOP the order or can i wire it? .If yes what,s the pin out?. No one said anything of ordering a wire for it, can i do that?. |
Tech833
Moderator
Username: Tech833
Post Number: 2472
Registered: 8-2002
| | Posted on Monday, October 05, 2020 - 11:25 pm: |
|
If you're asking Copper to wire a mic to a radio they don't sell, and/or don't have the wiring info for, then it is reasonable to assume they would not wire it.
I don't know anything about that radio, but hopefully there is a mic wiring pinout available somewhere on the internet. If so, have a crack at it yourself.
Your radio 'Mythbuster' since 1998
|
Dale
Senior Member
Username: Dale
Post Number: 2395
Registered: 12-2002
| | Posted on Wednesday, October 07, 2020 - 10:13 am: |
|
find out the wiring info..if its the same as say a lincoln 2 or 2950, magnum. coppers should be abler to wire it up as they see/or have sold these radios..
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Lou
Junior Member
Username: Lou
Post Number: 28
Registered: 7-2017
| | Posted on Thursday, October 08, 2020 - 7:52 pm: |
|
Coppers has a anytone 5555 for sale is it anything like the AT6666?. And as far as taking a crack at it myself i cant. My hands and eyes are not what that were back in the day .Thanks for all your help i will not be asking for anymore. |
Dale
Senior Member
Username: Dale
Post Number: 2396
Registered: 12-2002
| | Posted on Thursday, October 15, 2020 - 5:34 pm: |
|
ya i donmt know..find what the wiring diagram is ..should be in manual..if not get a hold of where ya bought it they may know..once ya get this and tell copper what it is they outta be able to do it
.ill also look for it
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
