Author |
Message |
Centurion
Junior Member Username: Centurion
Post Number: 18 Registered: 7-2020
| Posted on Tuesday, March 09, 2021 - 3:10 am: |
|
Can you add an RX output to a 2950 for use with a sdr system so you get recieve without the transmit RF being this was originally a 10 meter radio thought this might be possible since some other ham rigs have that option built in. |
Charliebrown
Advanced Member Username: Charliebrown
Post Number: 747 Registered: 10-2002
| Posted on Wednesday, March 10, 2021 - 8:39 pm: |
|
SDR SOFTWARE DEFINED RADIO There is no computer connection for this on the RCI 2950 DX. or any DX SERIES RADIO FROM RCI. Also there is no computer software for this radio to be programmed or any computer cable for this radio either. So no is the answer. |
Tech833
Moderator Username: Tech833
Post Number: 2488 Registered: 8-2002
| Posted on Friday, April 02, 2021 - 2:14 am: |
|
Looking over the schematic, I can find the IF output, but don't see a good way to get it out of the radio. If you're pretty handy with a schematic and a soldering iron, look for the 2nd I.F. output mixer and aim for that. Then, adjust the SDR IF freq. to the 2950 IF frequency. Your radio 'Mythbuster' with Copper Electronics since 1998
|