| Author |
Message |
    
Dale
Senior Member
Username: Dale
Post Number: 1299
Registered: 12-2002
| | Posted on Monday, March 03, 2008 - 6:30 pm: | 
|
trying to use a n/c mic with my s-45 but doesnt
have anywere near the audio.tried the 636l and
rk-56.with both mics using the 4 pin side of radio.reports were the rk-56 had a much better
tone and the 636 was more tinny sounding.but
neither matched the stock mic.question is if
i rewire the rk-56 and put on the 6pin side
would i have better luck?
dale/a.k.a.hotrod
cef426
cvc#64
|
Tech808
Moderator
Username: Tech808
Post Number: 15409
Registered: 8-2002
| | Posted on Monday, March 03, 2008 - 7:29 pm: |
|
Dale,
Sorry but NO as your radio does not know if you are using the stock Magnum 4 pin or 6 pin microphone jack.
The S-45 was designed to work at 100% with the factory stock MAGNUM microphones.
The 6 pin microphone connector is for your UP/DN controls and have nothing to do with the audio.
Hope this help's,
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 4176
Registered: 7-2004
| | Posted on Tuesday, March 04, 2008 - 4:30 pm: |
|
i currently use the stock mic on my early version delta force, dale, but have had agreeable reports using a road devil noise cancelling power mic. the dm452 & m575 i tried on the delta were acceptable, but any movement amplified everything & made it sound like i was in a windtunnel....and that was in the house, not even mobile. i never wired a shure 526t or turner +2 for it. remember, my early version delta has no topgun setup in it....
i have never seen anyone anywhere give favorable reports using an UNAMPLIFIED noise cancelling mic on the omega, delta, 257 magnums. |
Dale
Senior Member
Username: Dale
Post Number: 1303
Registered: 12-2002
| | Posted on Tuesday, March 04, 2008 - 6:10 pm: |
|
ok thanks lon
dale/a.k.a.hotrod
cef426
cvc#64
|
Dale
Senior Member
Username: Dale
Post Number: 1306
Registered: 12-2002
| | Posted on Wednesday, March 05, 2008 - 4:30 pm: |
|
yea pat thats what im finding.im getting great
audio reports with the stock mic.dont use
top gun i get great reports without it
dale/a.k.a.hotrod
cef426
cvc#64
|
Paganville
Junior Member
Username: Paganville
Post Number: 22
Registered: 2-2006
| | Posted on Thursday, March 06, 2008 - 8:31 pm: |
|
Hey Dale
I use the Omega everyday in my truck and I have found that the 636 and the RK56 offer almost the exact same tonal quality...with that said I have had to run the TG/on and Mic/G up all the way...I only use one of these if (like right now) a co-worker is using my Road Devil to see if it works for their voice and setup. When the Road Devil is at home in my truck I run the Mic/G (on the radio) at app. 10 o'clock for close talk and up to a maximum of 1 o'clock for "gettin out there". I run the mic gain on the mic exactly centered on "Vol", app. half way up and it has worked very well for me. |
Dale
Senior Member
Username: Dale
Post Number: 1311
Registered: 12-2002
| | Posted on Friday, March 07, 2008 - 8:27 pm: |
|
well on ssb i had a different opion as i heard
my own radio myself just not a radio check
i tried this with 3 different radios and 2
n/c mics with same result.this was on ssb however dont use ssb much...if at all.well
to check swrs..lol.yea thank-you for idea about topgun never tried that on ssb though hmmm
have to see
dale/a.k.a.hotrod
cef426
cvc#64
|
