| Author |
Message |
    
Dale
Intermediate Member
Username: Dale
Post Number: 467
Registered: 12-2002
| | Posted on Wednesday, June 14, 2006 - 3:56 pm: | 
|
if i were to get a used delta force or any other used magnum would rf limited still be willing to work on it.i checked around here and my tech isnt really familiar with them and has no clue about top gun.i was looking at one with the old orange lites but i believe the audio limiter is either cut/removed/disabled and the channel changer knob doesnt seem to work right sometimes it works sometimes it dont.and the radio is off freq. 273848 is were everyone else is to recieve it perfectly |
Tech808
Moderator
Username: Tech808
Post Number: 10289
Registered: 8-2002
| | Posted on Wednesday, June 14, 2006 - 5:07 pm: |
|
Dale,
NO PROBLEM!
The East Coast MAGNUM SERVICE CENTER is only about 76 miles from you in Strattanville, PA.
And Bob at (East Coast Magnum Service Center) is also the man who Designed/Created the Top Gun Modulator as well as many other design feature's for the Magnum Line of Radio's and can handle ALL of your In or Out of Warranty repair work for you.
Should you need to contact Bob you can call Sam Lewis direct at: 1-877-624-6869 or e-malto: saml@rflimited.com
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2979
Registered: 7-2004
| | Posted on Wednesday, June 14, 2006 - 5:07 pm: |
|
call or email sam lewis....if anybody knows magnum, it's his techs! |
Dale
Intermediate Member
Username: Dale
Post Number: 476
Registered: 12-2002
| | Posted on Thursday, June 15, 2006 - 2:39 pm: |
|
yea i knew about ******* but didnt know about any of his work how good he is.would he do ok or would sending it to the factory be the best?its just the delta force no topgun also older version
i was at ******** once when they were in barkyville,pa seems like a nice guy. |
Tech808
Moderator
Username: Tech808
Post Number: 10303
Registered: 8-2002
| | Posted on Thursday, June 15, 2006 - 3:19 pm: |
|
Dale,
Well if he help's to design the Magnum radio's and the component's that goes into the Magnum Radio's and is the East Coast Factory Magnum Service Center, I could only guess that Sam Lewis is VERY VERY SATISFIED with his work or he would not be a MAGNUM Factory Service Center.
Or you can give Sam a call (I posted his Phone number and e-mail address above) and maybe send it to the Magnum Factory Service Center in CA. or TN. but to me a MAGNUM Factory Service Center that is only 76 miles away is a lot closer. 
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2983
Registered: 7-2004
| | Posted on Thursday, June 15, 2006 - 5:23 pm: |
|
dale, i have had work done by chris & bob, from magnum/rf limited on ar3500's & magnums, when all was in Washington, to Ca to Pa & service has been 2nd to none! |
Alsworld
Senior Member
Username: Alsworld
Post Number: 1004
Registered: 1-2002
| | Posted on Thursday, June 15, 2006 - 9:55 pm: |
|
Dale,
I have had work done on my Delta Force by Chris in CA. It was great.
But my friend had work done by Bob and was extremely impressed. He has been in business for a long time, and like Tech 808 said, he is an authorized Magnum repair shop.
Your choice, but I would easily go to Bob without question being he is so close to you. You WON'T be sorry. He does not run a chop shop. I feel safe in saying you can trust him with your radio. And, I say that about few places.
Good luck in whatever you choose.
Alsworld |
Dale
Intermediate Member
Username: Dale
Post Number: 482
Registered: 12-2002
| | Posted on Friday, June 16, 2006 - 11:34 am: |
|
sounds like bobs will be my choice.the radio needs an overhaul some butcher was in it ,needs some tlc and very caring hands inside.alsworld
ya sound alot like me lol.thank-you guys for ya help |
