| Author |
Message |
    
Midwess
Junior Member
Username: Midwess
Post Number: 31
Registered: 12-2005
| | Posted on Wednesday, December 12, 2007 - 6:00 pm: | 
|
Hello all. Just placed an order for the S9-80 turbo. Like to know from people what they like or dislike about the radio? Any special wiring conditions I need to meet? I already have some ham gear in the vehicle so my pwr comes directly from the battery. The antenna is roof mount Wilson 1000. Your comments appreicated. Thanks! |
Tech808
Moderator
Username: Tech808
Post Number: 14830
Registered: 8-2002
| | Posted on Wednesday, December 12, 2007 - 7:11 pm: |
|
Sorry, never heard of an S-9-80 TURBO.
Do you happen to mean the:
Magnum S-9-80 W/Nitro Knobs
shown below?
Lon~Tech808
CEF#808~HAM#001
CVC#002
Tech808@copperelectronics.com
|
Midwess
Junior Member
Username: Midwess
Post Number: 32
Registered: 12-2005
| | Posted on Thursday, December 13, 2007 - 9:33 am: |
|
YES! Sorry was a typo on my part!! |
Midwess
Junior Member
Username: Midwess
Post Number: 33
Registered: 12-2005
| | Posted on Thursday, December 13, 2007 - 9:57 am: |
|
Astatic 636L
This mike work well with the Magnum S9-80?
If not what would be a good mic to put on? Thank you! |
Dodgeman
Intermediate Member
Username: Dodgeman
Post Number: 127
Registered: 10-2002
| | Posted on Thursday, December 13, 2007 - 11:42 am: |
|
Midwess I use that mic on my S9 an everybody says it sounds good clear. CEF#178 |
Midwess
Junior Member
Username: Midwess
Post Number: 34
Registered: 12-2005
| | Posted on Saturday, December 15, 2007 - 5:43 pm: |
|
Hello, ok great got the 636L and sounds great! I have another question since the knobs and all are still rather too bright for me, even with in low setting, is there a pot adjustment (if so, what is the ref.designator number on the board, and location) where I and turn down the brightness? Otherwise I like the radio, works great! |
Tech808
Moderator
Username: Tech808
Post Number: 14872
Registered: 8-2002
| | Posted on Monday, December 17, 2007 - 9:00 pm: |
|
Midwess,
Sorry but after talking with Sam Lewis today his suggestion was to have a good tech add small resistors to lower the voltage / DIM the NITRO KNOBS.
Lon~Tech808
CEF#808/HAM#001/CVC#002
Tech808@copperelectronics.com
|
