| Author |
Message |
    
Bigbob
| | Posted on Monday, January 28, 2002 - 8:34 pm: | 
|
2 questions;How many techs are there and what are there numbers,and would the diode and res. mod work between the preamp and BM ala NPC MOD.Or between BM and TX mixer? For ssb. |
Bigbob
| | Posted on Thursday, January 31, 2002 - 6:15 pm: |
|
I guess I should have asked you the first half of the question Forummaster.I'm still not sure how everything works around here,I don't wanna step on any toes. |
Bigbob
| | Posted on Saturday, February 02, 2002 - 8:38 pm: |
|
307???????????????????????THREE O SEVEN,HELLO? |
Bigbob
| | Posted on Sunday, February 03, 2002 - 3:08 pm: |
|
Darn it,I give up.Forummaster you might as well take this one off the board,I'm just talking to my self.It's just taking up valuable space anyway. |
Forummaster
| | Posted on Sunday, February 03, 2002 - 4:52 pm: |
|
Bigbob,
We have three techs, two of which are moderators. Tech307 and Tech181 moderate the "Ask the Tech" section. They usually read and answer questions in the other sections but sometimes they miss them. |
307
| | Posted on Sunday, February 03, 2002 - 6:45 pm: |
|
Bigbob...there are two techs(moderators). As for the second question , I am not clear as to what you are asking , please re-define.
307
|
Bigbob
| | Posted on Sunday, February 03, 2002 - 10:58 pm: |
|
I understand that the 2sb754 is a high level modulator for AM only,and is used as a switch for SSB to allow full mains current/voltage to the driver and finals.I was wondering if the diode/resistor combo would work for SSB if installed between the mike preamp and balanced modulator or between the balanced modulator and tx mixer?(ala NPC mod) |
Bigbob
| | Posted on Saturday, February 09, 2002 - 3:15 pm: |
|
I just posted for the heck of it to get it close to the top of the page,heeheehee. |
|
