| Author |
Message |
    
Lady Red
| | Posted on Monday, January 28, 2002 - 9:03 pm: | 
|
Hello - I have a 2980 and want to lower the key to 1/4 watt. I also want to keep the key at 4 or more watts when I turn the Rf power up. The problem is when I turn VR13 down to get 1/4 watt I can only get about 2 watts when the RF power is turned up. I know you can adjust the low and high keys with some radios. What can I do to get a very low key and also a high key?
Thanks - Lady Red |
jyd
| | Posted on Tuesday, January 29, 2002 - 5:38 pm: |
|
the only thing i can tell you is install a swing kit copper sells a good one,although i made my own for a 29 ltd,it keys less than a watt and swings 25.the one copper sells should work for what you want. |
Lady Red
| | Posted on Tuesday, January 29, 2002 - 6:24 pm: |
|
JYD - The swing is fine with the radio. I just want to have a very low DEAD KEY and then have a very high DEAD Key with the radio. If I set VR13 to give me a low key when I turn the RF power up I can only get 2 watts dead key with swing. |
|
