| Author |
Message |
    
Blacksmoke
New member
Username: Blacksmoke
Post Number: 1
Registered: 7-2012
| | Posted on Monday, November 12, 2012 - 3:22 pm: | 
|
I have 3 radios in my radio shack, and one base antenna. I have a 3 position antenna switch (one radio in, three antenna outs).
If I want to have the ability to use any of my three radios, out to one antenna, may I use this 3 position antenna switch and simply use it in "reverse"? So I'd input my three radios into the three antenna "outs", and use the one radio in for the one antenna out?
Thanks for the help.
ATX-01, Austin, TX |
Ronin
Member
Username: Ronin
Post Number: 89
Registered: 8-2006
| | Posted on Monday, November 12, 2012 - 9:16 pm: |
|
Yes. you can do that. I run my three radios that are currently on the desk into a 3-way coax switch and then into one Imax antenna.
Jim
CEF-813
K3ZOR
OT-235
|
Blacksmoke
New member
Username: Blacksmoke
Post Number: 2
Registered: 7-2012
| | Posted on Tuesday, November 13, 2012 - 11:00 am: |
|
Thank you |
Tech833
Moderator
Username: Tech833
Post Number: 2219
Registered: 8-2002
| | Posted on Friday, November 16, 2012 - 10:50 am: |
|
If you end up getting a second antenna and/or more radios, you may consider this switch setup- http://www.arraysolutions.com/images/SixPakManual2007.pdf
With that, you could assign any one of 6 radios to either of 2 antennas, without worry of accidentally switching more than one radio to the same antenna at the same time.
Your radio 'Mythbuster' since 1998
|
Alsworld
Senior Member
Username: Alsworld
Post Number: 1035
Registered: 1-2002
| | Posted on Wednesday, November 21, 2012 - 8:35 pm: |
|
Hey I heard you on the radio not long ago. I think it was 27.385 LSB. You ever talk local? |
Blacksmoke
New member
Username: Blacksmoke
Post Number: 3
Registered: 7-2012
| | Posted on Thursday, November 22, 2012 - 8:52 am: |
|
Hi Alsworld. Sent you a PM. |
