| Author |
Message |
    
530
New member
Username: 530
Post Number: 9
Registered: 2-2014
| | Posted on Thursday, October 08, 2015 - 4:40 pm: | 
|
Does anyone know the power stages for the switches, and the numbers on the rf output level knob on a TS 667V? I know what it says from TS Manual but it doesn't say what the wattages are when your switching it to the reduced power switches. Also does not explain what the knob rf output level is when adjusted. Anyone test this? |
Press_man
Advanced Member
Username: Press_man
Post Number: 885
Registered: 5-2008
| | Posted on Saturday, October 10, 2015 - 5:04 pm: |
|
http://www.texasstar.com/CWmed.html
Hope this helps.
As far as out put on transistors, if a pill is rated at say 125watts at 27mhz, they'll likely do 70/75% of their rated power RMS. PEP is higher. That's why they don't say how much power, too many variables. But, you have a good amp, class AB is cleaner than class C.
Welcome to Copper!
73 Pressman
|
Dale
Senior Member
Username: Dale
Post Number: 2243
Registered: 12-2002
| | Posted on Sunday, October 11, 2015 - 9:11 pm: |
|
the green button pushed in activates the variable power knob. with it pushed out this knob does function.cant say on output never used this one . but my 250v and 350v have same buttons and work the same.also use a low drive radio uniden grant /cobra 2000/ cobra 148 /ect. 4 watts am/12 watt ssb will max amp out .
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
