Copper Talk » Open Forum » Archived Messages » 2002 » Archived Messages 05/01/2002 to 06/30/2002 » Wattage question « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Biged
Posted on Wednesday, June 05, 2002 - 7:30 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have a dosey meter (TC3001) and so far it has seemed pretty accurate. I have actually taken a brand new 11 meter radio out of the box and tested it on this meter and has told me what I thought to be a correct reading. 5 watts DK. Now you all know that I just got a 2510 and I am extremely happy with it. Well, when I put this radio on the same meter, it DK's 22 watts, and swings 54 watts. Now I realize this isnt a bird by all means but my question is, IS this possible????? I dont know anything about the internal workings of this radio as far as what finals are in it or even how many. Is this a single or a dual final radio? Has anybody else had this high of a reading on thier's?? Or do I have a fluke.
Top of pagePrevious messageNext messageBottom of page Link to this message

Taz
Posted on Wednesday, June 05, 2002 - 9:49 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

i dont know, but it seems just a little heavey.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dx431
Posted on Thursday, June 06, 2002 - 2:09 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

A "stock" 2510 should DK 10w A.M and swing to around 15-20 with a good mic. (D-104 works well on these radios.) and SSB should be around 25w, 30w with a good mic. Sounds to me like whoever had that radio before you, has put a bigger final in it. It's possible, with the right final and the right tech in it, a person can get 80w out it.So, what you're reading on your meter, may not be far off.
Top of pagePrevious messageNext messageBottom of page Link to this message

Biged
Posted on Thursday, June 06, 2002 - 4:50 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Hmmm, I'll have to look and see what final is in it. Its hard to believe that it will do that much power without over heating. I have felt the heat sinc after a long jabber and its no hotter than usual. If it turns out to be a stock final, I will have no rest but until I take it to my tech and have him put it on a bird meter. Well, now that I am thinking about it, last night the power went out here in Maryland because of a storm. After boredom set in, I hooked my 2510 up to the same battery that I rum my 55 on all the time and it drained it within 15 minutes. I could run my 55 on it for hours, so that right there tells me that it definatly draws way more current. Well, when I find out I will let you all know...Eddie
Top of pagePrevious messageNext messageBottom of page Link to this message

Dx431
Posted on Friday, June 07, 2002 - 2:05 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Biged, the stock final is a MRF476. Souns like they did a power mod to it, in which case it could have a MRF497 in it.