| Author |
Message |
    
Boxcar
| | Posted on Wednesday, June 12, 2002 - 4:09 pm: | 
|
Anyone have any good pointers on an awesome brand for TVI Filters??? Or possibly web sites?? |
DeadlyEyes
| | Posted on Wednesday, June 12, 2002 - 11:12 pm: |
|
TVI Filters are not uncommon in the Amateur Radio field. You might try the following web site for a start....
coppers of course
texastowers.com
hamradio.com
Try these two for starters. They are a few of the better places. |
Jellybean
| | Posted on Wednesday, June 12, 2002 - 9:43 pm: |
|
I bought a Henry, expensive but made very well, works very well.
I've got mine mounted right after the amp with a 6" coax before the meter and switchbox. |
Taz
| | Posted on Thursday, June 13, 2002 - 1:21 pm: |
|
Find an old drake filter! they work best! |
Boxcar
| | Posted on Thursday, June 13, 2002 - 4:39 pm: |
|
I've heard that those "Drake" filters are not too shabby there!!!! I'll keep my eye out!!! |
bruce
| | Posted on Friday, June 14, 2002 - 8:10 am: |
|
i have 2 of them 30 years and still working! |
Taz
| | Posted on Tuesday, June 18, 2002 - 4:45 am: |
|
They are the only ones have seen that even work! |
Kirk
| | Posted on Tuesday, June 18, 2002 - 1:42 pm: |
|
Try an Oak Bay. They are very nicely constructed. Kenwood used to make an nice one also. |
Bigbob
| | Posted on Tuesday, June 18, 2002 - 8:11 pm: |
|
Are you talking rfi aka low pass filters or the little bullets that go onto tv input leads,and the only remedy for front end over load is dish or cable.I got an MFJ low pass filter its six years old and still working,but then I may have misunderstood completely and this foregoing diatribe is totally worthless,thank you. |
|
