| Author |
Message |
    
Orion
| | Posted on Thursday, July 17, 2003 - 7:14 pm: | 
|
I don't get it. The stock mic makes audio swing, a Silver Salute works, so does a 636L. THEN, I hook up a D104M6c and when I whistle the modulation only goes to 40%. Talking into it gives no noticeable audio. Battery was good, hooked up correctly to the 4 pin. No shorting. Changed the battery with a new one. Same problem. Tested battery.. it's fine.
I try a second D104m6c... same thing! Volume pot on rear of mic up all the way. What's up with this thing? I've tried everything and the DX99 works with all other 4 pins perfectly. |
Bman02
| | Posted on Thursday, July 17, 2003 - 7:31 pm: |
|
Thats really weird.I have a m6b(same thing except case is black)on mine and it works great.Sounds like you might have 2 bad mics or youre wiring them wrong. |
Bigbob
| | Posted on Thursday, July 17, 2003 - 9:00 pm: |
|
Try it on a different radio,sounds like a defective mike. |
Orion
| | Posted on Thursday, July 17, 2003 - 11:12 pm: |
|
Roger on that... two different mics, same exact result. I know if I try a third it'll be the same thing. And they're wired right. No doubt about it. I'd love to try it on a different rig but the only other rig is a 5 pin. |
de
| | Posted on Friday, July 18, 2003 - 3:22 am: |
|
Re Or....
Check this out....
http://home.comcast.net/~esprepair/d104.htm
DE
|
Tech671
| | Posted on Friday, July 18, 2003 - 5:27 am: |
|
Try it on a friend's rig! |
|
