| Author |
Message |
    
Musky
| | Posted on Saturday, October 18, 2003 - 8:16 am: | 
|
I have a few Palomar 300A's and wondered if it is safe to drive one with a palomar 90A. Would this work if you, ie; set the 90A to dead key 10W and swing 70W. I realize that you would have to keep the 300A on the low side. What kind of watttage would this produce? I'm sure a few of you have or had the old chrome tops. What is the most that can be put out(safely) with these amps? I am using six 6KD6 tubes. |
Tombstone
| | Posted on Sunday, October 19, 2003 - 1:12 am: |
|
Musky,
The 300 isn't made to drive with another amp, any amp like that is best driven with 3-4 watts max, if you overdrive it you'll get a "crappy" and "dirty" audio. Now if you have a small commercial type amp like a KW that's built for this you could drive it with the 90.
Tombstone |
RCI 2990
| | Posted on Sunday, October 19, 2003 - 2:32 am: |
|
the 300 A will take a drive of like 100 watts (swing not deadkey BTW) in low because you are not using the driver section.. this amp barks when driven on low.. I had one and it talked all over the place.. |
bill jacobbs
| | Posted on Sunday, October 19, 2003 - 4:24 pm: |
|
Tech masters what is the best base antenna i could
buy? Please tech masters tell me how imax 2000, imax 99, a99, and antron 305 are different and which is much better? |
RCI 2990
| | Posted on Sunday, October 19, 2003 - 7:57 pm: |
|
The I maxx 2000 rocks! Its probably one of the best you can get these days... I had one once and loved it but my ex took it away from me. Oh well.............. |
|
