| Author |
Message |
    
Simon
| | Posted on Sunday, October 19, 2003 - 9:58 am: | 
|
Hey Bruce.
Can you send me a copy of the CD with the HTX-10 Service Manual?? I got onto 29FM the other day and found out this one appears to be 5KHz+ off frequency. That is to get clear audio from any repeater I had to tune 5Khz high and then use the fine tune control...
By the way Ive been absent from here due to a crazy pc - constant Blue Screens and Invalid Operations errors. Finally hit it with a big hammer. Will use a bigger one shortly when I load Linux instead.
Simon
clowes@bmi.net
|
Bruce
| | Posted on Sunday, October 19, 2003 - 1:11 pm: |
|
check to see if shift is on SHIFT ON DISPLAYis lit TURN IT OFF hit function key hold for 3 sec then press shift (#3 key) to off its in the owners book |
ss8541
| | Posted on Sunday, October 19, 2003 - 2:43 pm: |
|
bruce, the 'shift' function only activates when he tx's. his rx is going to be whatever freq is displayed on the lcd. from what i read, it sounds like his rx is off freq. the shift function would not effect his rx, only his tx.
he says that he is using a rptr. there is no way to use a rptr if he turns the 'shift' off. |
Taz
| | Posted on Sunday, October 19, 2003 - 3:03 pm: |
|
Have fun with linux.
BTW, what windows version were you using? |
Bruce
| | Posted on Sunday, October 19, 2003 - 7:33 pm: |
|
simion what repeater are you using or are you simplex i got anther htx-10 sttting here so i can dupicate what your seeing
1st check to see if the SHIFT is turned on you want it off unless your running on a repeater
the receive / RIT ALSO changes transmitt frequency Htx-10's also have been found from the factory to have the FM detector coil miss tuned if so that could also explane what your seeing
wa4gch@yahoo.com |
Crafter
| | Posted on Sunday, October 19, 2003 - 10:29 pm: |
|
I give me a call simon we will put it on a counter and get it straight. |
Simon
| | Posted on Monday, October 20, 2003 - 9:44 am: |
|
Bruce,
Ive tried it with several repeaters and with a friend local on simplex, in all cases I needed to tune around 5khz higher to receive understandable audio. It probably is the FM discriminator coil that needs to be adjusted or the Rx deck.
Crafter I will catch-up with you snd we can check it ASAP or rather as soon as work allows.. |
Bruce
| | Posted on Monday, October 20, 2003 - 11:00 am: |
|
tune t3 |
