| Author |
Message |
    
Timberwolf135
| | Posted on Tuesday, February 10, 2004 - 4:39 pm: | 
|
can anyone help me wire a 4 pin astatic 636l mic,to a 5 pin uniden grant xl radio
thanks |
Tech808
| | Posted on Tuesday, February 10, 2004 - 6:47 pm: |
|
Timberwolf135,
Astatic 636L to Uniden Grant XL
PIN #1 ~ WHITE = AUDIO
PIN #2 ~ SHIELD = GROUND
PIN #3 ~ BLACK = RECEIVE
PIN #4 ~ BLUE = COMMON
PIN #5 ~ RED = TRANSMIT
YELLOW N/C
Hope this helps.
Lon
Tech808 |
Timberwolf135
| | Posted on Monday, February 16, 2004 - 8:13 am: |
|
FOR SOME REASON THIS MIKE ONLY HAS A SHIELD WHITE AUDIO RED THAT I THINK IS TX AND BLACK I THINK IS RX |
Tech808
| | Posted on Monday, February 16, 2004 - 8:45 am: |
|
The Stock Color Code for the Astatic 636L Mic is:
WHITE = AUDIO
SHIELD = GROUND
RED = TRANSMIT
BLACK = RECEIVE
BLUE = COMMON
YELLOW = AUDIO Sw (Not used a lot of times)
Hope this helps.
Lon
Tech808 |
Dx431
| | Posted on Monday, February 16, 2004 - 10:12 am: |
|
Timberwolf, if the mic is 4 wire, then it will not wire up to the Grant. You can do 1 of 2 things, you could replace the 5 pin socket with a 4 pin socket and rewire the inside of the radio, don't remember the precedure for this mod right off hand, or you can go the easy route, buy the 4 pin to 5 pin adaptor form Copper.
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prodM60-07428+
431
|
mikefromms
| | Posted on Monday, February 16, 2004 - 5:54 pm: |
|
This the noise reducing mike. A friend gave me one. I'm trying to to get it to work on a President Lincoln. I cut wires 4 and 5 but it doesn't do a think. 4 and 5 control up and down. What else should I do?
mikefromms |
Tech808
| | Posted on Monday, February 16, 2004 - 8:58 pm: |
|
mikefromms,
Wiring for your Lincoln to the Astatic 636L should be:
PIN #1 ~ WHITE
PIN #2 ~ SHIELD & BLUE
PIN #3 ~ BLACK
PIN #4 ~ N/C
PIN #5 ~ N/C
YELLOW N/C
Hope this helps.
Lon
Tech808 |
mikefromms
| | Posted on Tuesday, February 17, 2004 - 11:32 am: |
|
Makes sense to me. I'll double check pins 1,2,3, and see if anything is backward here. I'd really like to use this mike in the mobile.
Thanks a lot for all your help.
mikefromms |
|
