| Author |
Message |
    
Rich_1833
New member
Username: Rich_1833
Post Number: 8
Registered: 5-2004
| | Posted on Wednesday, May 19, 2004 - 8:40 pm: | 
|
I have a tower of 35 ft and as of now im useing a i max 2000. But was thinking about the maco m103c or the avq2-Quad what does everyone think of the change or should i keep what i have. (there is nothing wrong with my imax just trying to upgrade alittle) |
Dindin
Intermediate Member
Username: Dindin
Post Number: 121
Registered: 2-2004
| | Posted on Wednesday, May 19, 2004 - 9:02 pm: |
|
Rich_1833
the advantage of a beam like the m103 would be increased gain in 1 direction and the ability to reduce interference from another station.I would not use a beam alone.use the imax to locate a station and switch to the beam after you know where to aim.adding a beam to your station would be a positive upgrade.about the differences between the m103 and avq2 quad,both have there advantages.and different people have their prefrences,myself would go with the m103. |
Tech548
Moderator
Username: Tech548
Post Number: 63
Registered: 5-2004
| | Posted on Wednesday, May 19, 2004 - 9:26 pm: |
|
Rich_1833
That's excellent advice from Dindin.
And as far as the two mentioned beams go, personally, I would opt for the M-103.
Jeff. |
mark pa (Unregistered Guest)
Unregistered guest
| | Posted on Wednesday, May 19, 2004 - 9:59 pm: |
|
does anyone know the surface finishes for copper???(school)
|
Rich_1833
Junior Member
Username: Rich_1833
Post Number: 10
Registered: 5-2004
| | Posted on Wednesday, May 19, 2004 - 10:02 pm: |
|
so would i put the beam right below the imax's base or do i need a different tower and is it going to work at alittle under 35 feet. |
