| Author |
Message |
    
Harvester
New member
Username: Harvester
Post Number: 8
Registered: 1-2003
| | Posted on Wednesday, January 26, 2005 - 11:18 pm: | 
|
wilson 1000 roof mount
what size hole do i need to drill in the roof ?
i read somewhere that i need to drill a large hole .is that true
thanks all
|
Tech808
Moderator
Username: Tech808
Post Number: 4647
Registered: 8-2002
| | Posted on Thursday, January 27, 2005 - 12:24 am: |
|
Harvester,
YES you will have to drill a hole in the roof.
Personally I have never used a roof mount and cannot tell you the size of the bolt but if you call WILSON ANTENNAS they should be able to answer all your questons.
Wilson Antennas can be contacted via the following telephone numbers:
Toll Free:
1-800-541-6116
1-800-558-4620
1-800-848-4294
Hope this helps,
Lon
Tech808
CEF808
N9OSN
|
Mrnobody
Junior Member
Username: Mrnobody
Post Number: 42
Registered: 6-2003
| | Posted on Thursday, January 27, 2005 - 6:51 am: |
|
i just did an install with the roof mount you need a 3/4 hole. instructions say you can also use a 7/8 too but 3/4 works great.
hope this helps
CHRIS |
