Author |
Message |
TED MILLS
| Posted on Saturday, June 29, 2002 - 9:03 pm: |
|
I PURCHASED A NEW GALAXY DX 2517, I LIKE THE RADIO VERY MUCH, IT HAS ONLY FIVE DIGIT READ OUT IN IT, WHAT IS THE BEST WAY TO INSURE YOU ARE RIGHT ON FREQUENCY? ALSO IF I ONLY WANTED 15WATTS PEP OUT PUT, WOULD I SET THE FR OUTPUT KNOB ON AM TO READ FIVE WATTS OUTPUT, ANY INFORMATION ON THIS RADIO I WOULD REALLY ENJOY HEARING. THANK YOU TED |
Dx431
| Posted on Monday, July 08, 2002 - 1:47 am: |
|
Put the clarifier on 12 o'clock, straight up. What mic are you using? Do you want 15w on A.M or SSB? |
Karatebutcher
| Posted on Monday, July 08, 2002 - 11:18 am: |
|
Hi DX431 thank you for your interest, i have found that I can put the fine tuner , CLARIFER AT 12 coclock, and then tune in the frequency, with the coarse,then adjust with the fine . it seems to work well, I have been told my others to put a watt meter on the radio, on ssb, and using the D104 I have it turned down pretty much, and I listen to the talkback to make sure it sounds good,.on 5 on the mike grin, which I foundout controls the pep output, saying Ahhhhhh into the mike, useing the mike gain i turn it until it shows on the meter 15 watts pep.As for AM, I use the power output know, I am enjoying this radio more and more as I get use to it, If you have any more advise please write or e, mail , Thank you for your interest, |
Dx431
| Posted on Monday, July 08, 2002 - 1:11 pm: |
|
Karatebutcher, The best advice I can give you is, read the instruction booklet and play your radio. And most of all, have fun!! |
|