| Author |
Message |
    
Oldpirate
Junior Member
Username: Oldpirate
Post Number: 39
Registered: 11-2003
| | Posted on Friday, October 15, 2004 - 9:59 pm: | 
|
Anyone have any ideas on how to wire up these mics to a RCI 2950DX.
Thanks Murray |
Racer X (Unregistered Guest)
Unregistered guest
| | Posted on Thursday, October 21, 2004 - 6:57 pm: |
|
Does the 2950DX receive without a microphone connected? |
Racer X (Unregistered Guest)
Unregistered guest
| | Posted on Saturday, October 23, 2004 - 12:34 pm: |
|
Well, I don't know if the 2950DX receives without the microphone connected. If it does, then the answer is simple. If not, then I don't know how to do it.
Here is the standard Kenwood microphone wiring. The colors vary slightly from model to model, but this information came from the MC-80 manual and I confirmmed it is correct for a Kenwood MC-85 also.
Kenwood Mic Pinout
1 - White - Mic Audio
2 - Red - STBY (PTT)
3 - Brown - Down
4 - Blue - Up
5 - Green - NC - +8V @10mA - to power microphone
6 - NC - No Connection
7 - Shield - GND (Mic)
8 - Black - GND (STBY) |
Tech808
Moderator
Username: Tech808
Post Number: 3915
Registered: 8-2002
| | Posted on Saturday, October 23, 2004 - 3:40 pm: |
|
Yes, it does Receive without A microphone being connected or at least my 2970DX and 2995DX does with the same boards. |
