Author |
Message |
Kc5rcv
New member Username: Kc5rcv
Post Number: 3 Registered: 11-2007
| Posted on Wednesday, December 05, 2007 - 4:39 pm: |
|
Im needing to know I did the mod where you move the piece to the other pins. Then I added a switch on the other pins so I can use 10 and 11 meters because if you dont it wont let you. Will this hurt the radio in any way? |
Tech808
Moderator Username: Tech808
Post Number: 14795 Registered: 8-2002
| Posted on Wednesday, December 05, 2007 - 6:04 pm: |
|
Kc5rcv, By moving the shorting block at J-29 to the BACK TOP RIGHT position as shown below by "00" will give you coverage from 25.615 thru 28.305. There is no need to add a switch to the other pins. J-29 X00 XXX And No the Frequency conversion as posted above will not hurt the radio. Lon~Tech808 CEF#808~HAM#001 CVC#002 Tech808@copperelectronics.com
|
Kc5rcv
New member Username: Kc5rcv
Post Number: 4 Registered: 11-2007
| Posted on Saturday, December 08, 2007 - 11:10 pm: |
|
Im wanting to also use 28.300 through 28.500 USB that mod wouldnt allow that. But if you add a jumper to the two far left pins and put them on a switch when you flip the switch it will allow you to go into 28.300 through 29.000 and down into 25.000 and 26.000 just hoping that doesnt cause a problem |