Copper Talk » Ask The Tech » Installations » Help with Mount for a Base Antenna « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jjk9
New member
Username: Jjk9

Post Number: 2
Registered: 1-2008
Posted on Saturday, January 12, 2008 - 2:00 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I am having trouble finding a chimney mount system or even a tripod roof mount for an Imax 2000 antenna. I tried the local Radio Shack this morning; I have one of their Chimney Mts up from 12 years ago (scanner antenna)and it's held up fine; problem is the one they currently have seems extremely light duty; nothing like the old one. I've tried my local Home Depot, Lowes, and 1 local "Just Do-It" Center with no kind of luck. Can anyone offer any suggestions? Thanks in advance
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech237
Moderator
Username: Tech237

Post Number: 943
Registered: 4-2004
Posted on Saturday, January 12, 2008 - 4:53 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Try clamping it to a metal vent pipe. That's how my three verticals are put up at home..

Check satelitte installers - they often have tripods..
Simon
Tech237
N7AUS

Top of pagePrevious messageNext messageBottom of page Link to this message

Patzerozero
Senior Member
Username: Patzerozero

Post Number: 4107
Registered: 7-2004


Posted on Saturday, January 12, 2008 - 5:35 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

my maco v5/8 with a bit more windload then the i2k is temporarily chimney mounted using 2 of radio shacks 'extremely light duty' chimney mount kits-just in case. it has withstood 65 mph winds on a couple occasions. my 6/2/432 stacked loops are on a 3' tripod i got from radio shack. several of my local stores still have the mount & tripods IN STOCK. several local home depots also have both in stock. go to any of the BIG ham radio distributors, most have rohn tripods & i've seen chimney mounts listed as well.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bridge_man
Member
Username: Bridge_man

Post Number: 71
Registered: 3-2006
Posted on Saturday, July 12, 2008 - 10:34 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

most Radio Shacks have chimney mounts.Also try Ace hardware.I have a A99 on a 25' mast on a very cheap looking chimney mount.its been there for some time now through alot of strong winds and its still there.I put a 2x4 block on the shingle roof and let the weight of the mast sit on it to take some of the pressure off.
Top of pagePrevious messageNext messageBottom of page Link to this message

Starface
Senior Member
Username: Starface

Post Number: 1991
Registered: 1-2005


Posted on Saturday, July 12, 2008 - 11:50 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

you could make one of your own, try a mobile home supply store and ask for the trailor tie down straps, they work great and are very strong, have to be to hold down a mobile home in strong winds.
George
CEF#Ø476
KI4NBE Amateur Extra
HAM#Ø181
CVC#ØØ14

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: