| Author |
Message |
    
Radiodude
Advanced Member
Username: Radiodude
Post Number: 542
Registered: 1-2002
| | Posted on Monday, February 11, 2008 - 2:22 pm: | 
|
Will this echo board work in my 2995dx?
P03-00006 Big Radio Sound Echo Board
$19.99
Copper sells these and I was wondering if it will work/
Thanks
Ernie
KC8YOQ
Copper 123
Walkie Talkie
2NA750
|
Tech808
Moderator
Username: Tech808
Post Number: 15261
Registered: 8-2002
| | Posted on Monday, February 11, 2008 - 8:11 pm: |
|
Radiodude,
Yes it will.
P03-00006 Big Radio Sound Echo Board
[P03-00006] $19.99
The BR-1 features a simple 3 wire installation and a micro-sized board that will fit in any mobile radio.
Now any radio can have that Big Radio Sound!
The BR-1 Big Radio Sound™ echo/reverb board uses the latest technology to achieve the smoothest sounding reverb for that studio broadcast transmit audio.
Specifications:
Length: 1-3/4"
Width: 1-3/8"
Height: 1/2"
Control Cable: 6" w/Chrome On/Off Variable Control
Installation:
Easy to understand 3 Wire Installation Instruction's for ALL Radios.
For 4-Pin: Cobra, Uniden, and RCI Brands (Galaxy,Connex, General, SuperStar, etc).
#1 ~ Solder the RED wire to a switched positive (+) 12VDC source inside the radio.
#2 ~ Solder the Shield (ground} portion of the gray coaxial cable to the Ground Pin of the microphone connector.
#3 ~ Solder the White (conductor) portion of the grey coaxial cable to PIN
#2 (Microphone Audio) of the microphone connector.
For All Other Radio's:
#1 ~ RED (Power Wire) goes to a switched Positive (+) 12VDC Source inside the radio.
#2 ~ Black (Shield/Ground Wire) connects to Ground Pin of Microphone Connector.
#3 ~ White (Audio Wire) connects to Audio Pin of Mic Connector.
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
Radiodude
Advanced Member
Username: Radiodude
Post Number: 543
Registered: 1-2002
| | Posted on Monday, February 11, 2008 - 8:23 pm: |
|
Great! Thanks Lon! I will order one when I get back from Daytona! O did I mention I was going to the 500?
Question Where is the best spot to I find the +12 volts I need to power it, inside the radio?
Ernie
KC8YOQ
Copper 123
Walkie Talkie
2NA750
|
|
