| Author |
Message |
    
Barakuda318
Intermediate Member
Username: Barakuda318
Post Number: 151
Registered: 2-2002
| | Posted on Friday, March 07, 2008 - 9:48 pm: | 
|
I have a boinggg sound toy that I am wondering what the color codes for the wires are so that I can install it in my radio I used to have the installation instructions but have lost them and can't remember how to hook it up. |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 4180
Registered: 7-2004
| | Posted on Saturday, March 08, 2008 - 8:01 pm: |
|
how many wires & what colors? black=ground, red=positive PROBABLY only 8-9 volts while mic is keyed ONLY so you're gonna have to search out a place for that, maybe 2 other wires, 1 'input' & 1 'output' from audio line of mic..... |
Barakuda318
Intermediate Member
Username: Barakuda318
Post Number: 152
Registered: 2-2002
| | Posted on Saturday, March 08, 2008 - 9:25 pm: |
|
I'll check that and get back with you lol Have to did it out of storage...thanks. |
Barakuda318
Intermediate Member
Username: Barakuda318
Post Number: 154
Registered: 2-2002
| | Posted on Saturday, March 08, 2008 - 10:37 pm: |
|
Found it, the wires are two black one red one yellow and one blue...
73's Barakuda318
|
Tech291
Moderator
Username: Tech291
Post Number: 499
Registered: 11-2004
| | Posted on Sunday, March 09, 2008 - 10:33 am: |
|
yellow = mic audio
blue = ptt
red = V+ 8-10 vdc
black = gnd.
they MAY operate on 12 volts but most were designed to be installed inside a power mic and powered off the 9 volt battery.they were disabled by putting a switch on the red wire.
{tech291} |
Barakuda318
Intermediate Member
Username: Barakuda318
Post Number: 156
Registered: 2-2002
| | Posted on Sunday, March 09, 2008 - 5:30 pm: |
|
thanks man I really appreciate it, I guess there's just two ground wires kinda weird but I looked at the solder traces and they go to the same place so anyway thanks again.
73's Barakuda318
|
