Copper Talk » Ask The Tech » Radios BASE » 2990 power supply help « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 587
Registered: 11-2001
Posted on Monday, March 24, 2008 - 10:14 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

it was working fine then the next time i keyed it down the lights went dim on key down.i hooked a volt meter to it and it shows 12.85 and when i key it it drops tp 7.25.everything looks great no discolor on anything, it all looks new.anyone?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 588
Registered: 11-2001
Posted on Tuesday, March 25, 2008 - 4:19 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

it is hard o beleive that out of all the 2990 radios nobody know or has a clue.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 15559
Registered: 8-2002


Posted on Tuesday, March 25, 2008 - 4:34 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Jyd,

From what little information you are giving I could only "GUESS" the 2990 power supply is dying.

The 2990 has been discontinued for quite some time now with NO support from ranger for parts and without checking everything in the radio to determine/find the problem you could be hunting forever to try and find / fix the problem.

You may need to find a good Tech in your area to go trough the radio to determine what the actual problem is.
Lon~Tech808
CEF#0808/HAM#001/CVC#0002

Tech808@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluebird
Member
Username: Bluebird

Post Number: 88
Registered: 2-2004


Posted on Tuesday, March 25, 2008 - 5:32 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

does the 2990 have a dc switch/plug on the back?
try a external power supply on it.
mitchell
bluebird
cef 398
cvc 113
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 15561
Registered: 8-2002


Posted on Tuesday, March 25, 2008 - 6:21 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Bluebird,

Sorry but No.

It has a Factory/Ranger installed AC 3 prong/standard 110 Volt Power Cord connected directly to the radio.
Lon~Tech808
CEF#0808/HAM#001/CVC#0002

Tech808@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 589
Registered: 11-2001
Posted on Tuesday, March 25, 2008 - 7:45 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

do you think if i bought a 25 amp power supply from copper the insides would fit in the 2990?
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderbolt
Junior Member
Username: Thunderbolt

Post Number: 44
Registered: 1-2002
Posted on Wednesday, March 26, 2008 - 12:53 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

well I posted a comment 2 times but I guess it doesnt get to the board. Seems like someone does not want me to help. I wont try again.
Thunderbolt
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 15574
Registered: 8-2002


Posted on Wednesday, March 26, 2008 - 5:52 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thunderbolt,

Maybe you forgot What Topic / Area of the Copper Forum you posted your Question's/Comments under?

By doing a search I found the following and ALL of the Posts you have Submitted to the Copper Forum have been APPROVED and POSTED.

67 posts on 45 pages in 3 topics

Copper Talk
Product Reviews
Radios
Ranger / RCI / Texas Ranger, Voyage VR-9000 Questions & C...
THE NEW 2995 DX WITH THE NEW POWER SUPPLY
Thunderbolt - 3/09, 11:16 pm - The only thing I see wron
Thunderbolt - 3/25, 9:39 pm - Tech808, According to Ra
Texas ranger 296
Thunderbolt - 3/23, 9:24 pm - I have a 296 and I know it has the 148
RCI 6300F series
Thunderbolt - 9/05, 10:04 am - Was wondering about this line also.Can
Texas Ranger 396F
Thunderbolt - 9/05, 10:00 am - Was wondering how this radio performs
Galaxy /Mirage Questions & Comments
Galaxy 99V
Thunderbolt - 9/17, 4:09 pm - Just to let you know ,I am a ranger
Ask The Tech
Modifications
Dual final conversion for single final radios
Thunderbolt - 5/14, 4:04 pm - All the new Galaxy export radios out
Millenium 2002
Thunderbolt - 9/13, 9:54 am - I picked the radio up but dont know how
Thunderbolt - 9/15, 5:51 pm - Thanks 671. Do you know how to get the
Installing Workmam Five Tone Roger Beep
Thunderbolt - 10/02, 12:25 am - I need to know how to wire the 5 tone
Galaxy DX-2547 Modifications..
Thunderbolt - 9/05, 3:02 pm - On the radios above with freq counter
Thunderbolt - 9/12, 10:30 am - How do you unlock the clarifier to go
RCI 2950 DX question, just wondering
Thunderbolt - 8/18, 9:47 pm - If you install the jumper on the two
Radios Mobile
Archived Messages
Lon, I need 30 watts
Thunderbolt - 3/08, 1:38 pm - I was reading this post a
Cobra 29LTD Hot TR23
Thunderbolt - 2/29, 9:41 am - No TX,No RX and TR23 gets
Thunderbolt - 2/29, 6:46 pm - well,I replaced both of t
Thunderbolt - 3/07, 3:07 pm - I am getting 2 volts betw
Cobra 29 LTD Classic Problems
Thunderbolt - 9/01, 8:49 pm - First thing that is way out of the
Superstar 2900GHP freq problem
Thunderbolt - 4/11, 2:15 pm - I just got the radio and converted it
Thunderbolt - 4/12, 4:55 pm - Misprint on title.It is a 3900,duel
Cobra 148GTL loosing power on SSB
Thunderbolt - 9/02, 11:43 am - The radio wotks fine on AM,deadkey 5
Thunderbolt - 9/02, 12:56 pm - Well,solved my own question. I did
Thunderbolt - 9/02, 2:13 pm - I am back again. I am still getting
President Jackson no TXor RX
Thunderbolt - 7/24, 9:54 am - All lights are lit but no Tx or Rx. I
Thunderbolt - 7/25, 1:45 pm - Well,I am not sure where to test for 8
Thunderbolt - 7/25, 4:39 pm - I replaced the hot capacitor near PLL
Thunderbolt - 7/25, 2:29 pm - The Tx indicator does NOT light up when
Do you have a blown up radio?
Thunderbolt - 8/14, 9:03 pm - I have the old model RCI 2950 I
Ranger 6900F-Turbo/ Echo-too much
Thunderbolt - 9/15, 11:24 am - Ok,the echo board in the 6900f has only
No Name radio ( PRESIDENT JACKSON)
Thunderbolt - 8/21, 11:35 pm - I am trying to find a scematic for a
Replace AM mod limiter 2950DX
Thunderbolt - 3/18, 1:34 pm - A late post here. I want
Antennas
TV inreferance
Thunderbolt - 8/25, 10:06 pm - I am in a townhome and I am bleeding
Mobil antennas for a base station?
Thunderbolt - 10/14, 9:54 am - I am trying to help a friend with a
Radios Base
Galaxy dx 2547
Thunderbolt - 3/25, 11:24 am - sounds like one of the re
2990 echo feedback after unkey
Thunderbolt - 3/22, 9:36 pm - When I have the processor
Cobra 2000
Thunderbolt - 4/19, 12:08 am - when I have my freq counter button
Amplifiers
Golden eagle 1KW base amp
Thunderbolt - 10/08, 9:56 am - what tubes are in this amp?
No swing on boomer amp
Thunderbolt - 9/13, 9:48 pm - Ok,I am working on a boomer base amp
Thunderbolt - 9/16, 8:22 pm - LOL,xlaxx whats up! well this is
Texas Star Dx 500V smoked
Thunderbolt - 9/30, 12:28 pm - I was talking on it when it went. I
Thunderbolt - 10/01, 1:23 am - If the pills where bad would I still
Thunderbolt - 10/14, 9:26 am - I am still going over this amp. I did
Thunderbolt - 11/26, 7:03 pm - Ok,I am back at this amp again. I have
Thunderbolt - 11/27, 10:46 am - I am a little confused on what the
Thunderbolt - 12/03, 1:08 pm - ok,back again. I replaced that resistor
Palomar Elite 250
Thunderbolt - 11/11, 3:50 pm - When keyed the relay clicks over but
Old Polamar Amp
Thunderbolt - 8/09, 4:14 pm - I have an old polamar amp I just bought
Thunderbolt - 8/12, 7:18 pm - Well thanks for the comments but I dont
Thunderbolt - 8/24, 1:03 pm - I took this amp to the docter about 2
KL-203 Mobil Amp
Thunderbolt - 9/14, 10:07 pm - Just to let you know, that if you have
Kl 203 INFORMATION
Thunderbolt - 9/16, 11:55 am - Was just wondering about this amp.I
Tech question about texas star dx667v
Thunderbolt - 9/01, 2:19 pm - I need to know where the red power wire
Tuning an old tube amp
Thunderbolt - 8/22, 6:31 pm - I just got an old tube amp in great
Thunderbolt - 8/22, 8:57 pm - Thanks 307.I will do that .I guess
Installations
General
Engine noise
Thunderbolt - 8/21, 10:17 am - I have a 88 ford ranger xtra cab small
Thunderbolt - 8/24, 1:14 pm - The engine noise is coming through my
Noise toy instllation
Thunderbolt - 10/02, 12:12 am - I want to know how to wire the workman
General Technical Questions
Archived Messages
Superstar 3900 GHP power too low
Thunderbolt - 8/30, 5:22 pm - I have peeked many radios that have
VR9000
Thunderbolt - 9/18, 4:48 pm - Just to let you guys know. On the
Ham Gear
ATTN 307... Help with RCI 2970DX and 2995 DX FM problems
Thunderbolt - 3/10, 3:28 pm - Guys,there is a FM freque
2950 Receiver Noise
Thunderbolt - 1/06, 6:35 pm - I have a 2950Dx and when I turn my
Modifications
Radios
RCI-2960JP channel mods
Thunderbolt - 6/01, 3:10 pm - I just picked one up new in the box. It
Thunderbolt - 6/09, 10:19 pm - well guys,I ordered the 6 pos switch
Rodger Beep for SuperStar 3900HP Gold???
Thunderbolt - 7/21, 6:22 pm - All of the 3900GHPs that I have
Ranger TR-396f series
Thunderbolt - 9/08, 2:34 pm - Was wondering if it is true that you
2950 AM receive
Thunderbolt - 4/01, 3:00 pm - I had a 2950 and a 2980 that did the
Amplifiers
Texas Star dx667v
Thunderbolt - 9/01, 2:14
Lon~Tech808
CEF#0808/HAM#001/CVC#0002

Tech808@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 591
Registered: 11-2001
Posted on Wednesday, March 26, 2008 - 8:48 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

ok
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderbolt
Junior Member
Username: Thunderbolt

Post Number: 46
Registered: 1-2002
Posted on Sunday, March 30, 2008 - 7:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

found my post almost a week after I sent under Bluebirds post for help on a 2547. I did not post it there to begin with. Plus it took several days to show up in the wrong place. I havent found the other one yet. Sorry JYD for the delay. I think the forum masters may be volunteers and it takes them time to post everyones comments it seems.
That power supply is a trouble maker and it could be several cheap things to fix but in the end it will die most likely. Just go with a 25 amp power supply and wire in through the back and set it next to the radio. Trying to get it inside and keep it cool might be an issue. I would still get the fan kit for the heatsink.
Thunderbolt
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 15596
Registered: 8-2002


Posted on Sunday, March 30, 2008 - 8:07 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thunderbolt,

ALL 71 of your submitted post's have been APPROVED and POSTED within 24 hours of you posting / submitting them.

Since you have made so many post's under so many different topics it is easy for a person to forget what TOPIC or AREA of the Copper Forum that you posted / submitted them to.

Your search found 71 posts on 47 pages in 3 topics.

Copper Talk
Product Reviews
Radios
Ranger / RCI / Texas Ranger, Voyage VR-9000 Questions & C...
THE NEW 2995 DX WITH THE NEW POWER SUPPLY
Thunderbolt - 3/09, 11:16 pm - The only thing I see wron
Thunderbolt - 3/25, 9:39 pm - Tech808, According to Ra
Texas ranger 296
Thunderbolt - 3/23, 9:24 pm - I have a 296 and I know it has the 148
RCI 6300F series
Thunderbolt - 9/05, 10:04 am - Was wondering about this line also.Can
Texas Ranger 396F
Thunderbolt - 9/05, 10:00 am - Was wondering how this radio performs
Galaxy /Mirage Questions & Comments
Galaxy 99V
Thunderbolt - 9/17, 4:09 pm - Just to let you know ,I am a ranger
Ask The Tech
Modifications
Dual final conversion for single final radios
Thunderbolt - 5/14, 4:04 pm - All the new Galaxy export radios out
Millenium 2002
Thunderbolt - 9/13, 9:54 am - I picked the radio up but dont know how
Thunderbolt - 9/15, 5:51 pm - Thanks 671. Do you know how to get the
Installing Workmam Five Tone Roger Beep
Thunderbolt - 10/02, 12:25 am - I need to know how to wire the 5 tone
Galaxy DX-2547 Modifications..
Thunderbolt - 9/05, 3:02 pm - On the radios above with freq counter
Thunderbolt - 9/12, 10:30 am - How do you unlock the clarifier to go
RCI 2950 DX question, just wondering
Thunderbolt - 8/18, 9:47 pm - If you install the jumper on the two
Radios Mobile
Archived Messages
Lon, I need 30 watts
Thunderbolt - 3/08, 1:38 pm - I was reading this post a
Cobra 29LTD Hot TR23
Thunderbolt - 2/29, 9:41 am - No TX,No RX and TR23 gets
Thunderbolt - 2/29, 6:46 pm - well,I replaced both of t
Thunderbolt - 3/07, 3:07 pm - I am getting 2 volts betw
Cobra 29 LTD Classic Problems
Thunderbolt - 9/01, 8:49 pm - First thing that is way out of the
Superstar 2900GHP freq problem
Thunderbolt - 4/11, 2:15 pm - I just got the radio and converted it
Thunderbolt - 4/12, 4:55 pm - Misprint on title.It is a 3900,duel
Cobra 148GTL loosing power on SSB
Thunderbolt - 9/02, 11:43 am - The radio wotks fine on AM,deadkey 5
Thunderbolt - 9/02, 12:56 pm - Well,solved my own question. I did
Thunderbolt - 9/02, 2:13 pm - I am back again. I am still getting
President Jackson no TXor RX
Thunderbolt - 7/24, 9:54 am - All lights are lit but no Tx or Rx. I
Thunderbolt - 7/25, 1:45 pm - Well,I am not sure where to test for 8
Thunderbolt - 7/25, 4:39 pm - I replaced the hot capacitor near PLL
Thunderbolt - 7/25, 2:29 pm - The Tx indicator does NOT light up when
Do you have a blown up radio?
Thunderbolt - 8/14, 9:03 pm - I have the old model RCI 2950 I
Ranger 6900F-Turbo/ Echo-too much
Thunderbolt - 9/15, 11:24 am - Ok,the echo board in the 6900f has only
No Name radio ( PRESIDENT JACKSON)
Thunderbolt - 8/21, 11:35 pm - I am trying to find a scematic for a
Replace AM mod limiter 2950DX
Thunderbolt - 3/18, 1:34 pm - A late post here. I want
Antennas
TV inreferance
Thunderbolt - 8/25, 10:06 pm - I am in a townhome and I am bleeding
Mobil antennas for a base station?
Thunderbolt - 10/14, 9:54 am - I am trying to help a friend with a
Radios Base
2995dx
Thunderbolt - 3/30, 7:26 pm - $300 for a 2995dx is a st
2990 power supply help
Thunderbolt - 3/26, 12:53 pm - well I posted a comment 2
Thunderbolt - 3/30, 7:16 pm - found my post almost a we
Galaxy dx 2547
Thunderbolt - 3/25, 11:24 am - sounds like one of the re
Thunderbolt - 3/30, 7:04 pm - sorry Bluebird. This resp
2990 echo feedback after unkey
Thunderbolt - 3/22, 9:36 pm - When I have the processor
Cobra 2000
Thunderbolt - 4/19, 12:08 am - when I have my freq counter button
Amplifiers
Golden eagle 1KW base amp
Thunderbolt - 10/08, 9:56 am - what tubes are in this amp?
No swing on boomer amp
Thunderbolt - 9/13, 9:48 pm - Ok,I am working on a boomer base amp
Thunderbolt - 9/16, 8:22 pm - LOL,xlaxx whats up! well this is
Texas Star Dx 500V smoked
Thunderbolt - 9/30, 12:28 pm - I was talking on it when it went. I
Thunderbolt - 10/01, 1:23 am - If the pills where bad would I still
Thunderbolt - 10/14, 9:26 am - I am still going over this amp. I did
Thunderbolt - 11/26, 7:03 pm - Ok,I am back at this amp again. I have
Thunderbolt - 11/27, 10:46 am - I am a little confused on what the
Thunderbolt - 12/03, 1:08 pm - ok,back again. I replaced that resistor
Palomar Elite 250
Thunderbolt - 11/11, 3:50 pm - When keyed the relay clicks over but
Old Polamar Amp
Thunderbolt - 8/09, 4:14 pm - I have an old polamar amp I just bought
Thunderbolt - 8/12, 7:18 pm - Well thanks for the comments but I dont
Thunderbolt - 8/24, 1:03 pm - I took this amp to the docter about 2
KL-203 Mobil Amp
Thunderbolt - 9/14, 10:07 pm - Just to let you know, that if you have
Kl 203 INFORMATION
Thunderbolt - 9/16, 11:55 am - Was just wondering about this amp.I
Tech question about texas star dx667v
Thunderbolt - 9/01, 2:19 pm - I need to know where the red power wire
Tuning an old tube amp
Thunderbolt - 8/22, 6:31 pm - I just got an old tube amp in great
Thunderbolt - 8/22, 8:57 pm - Thanks 307.I will do that .I guess
Installations
General
Engine noise
Thunderbolt - 8/21, 10:17 am - I have a 88 ford ranger xtra cab small
Thunderbolt - 8/24, 1:14 pm - The engine noise is coming through my
Noise toy instllation
Thunderbolt - 10/02, 12:12 am - I want to know how to wire the workman
General Technical Questions
Archived Messages
Superstar 3900 GHP power too low
Thunderbolt - 8/30, 5:22 pm - I have peeked many radios that have
VR9000
Thunderbolt - 9/18, 4:48 pm - Just to let you guys know. On the
Ham Gear
ATTN 307... Help with RCI 2970DX and 2995 DX FM problems
Thunderbolt - 3/10, 3:28 pm - Guys,there is a FM freque
2950 Receiver Noise
Thunderbolt - 1/06, 6:35 pm - I have a 2950Dx and when I turn my
Modifications
Radios
RCI-2960JP channel mods
Thunderbolt - 6/01, 3:10 pm - I just picked one up new in the box. It
Thunderbolt - 6/09, 10:19 pm - well guys,I ordered the 6 pos switch
Rodger Beep for SuperStar 3900HP Gold???
Thunderbolt - 7/21, 6:22 pm - All of the 3900GHPs that I have
Ranger TR-396f series
Thunderbolt - 9/08, 2:34 pm - Was wondering if it is true that you
2950 AM receive
Thunderbolt - 4/01, 3:00 pm - I had a 2950 and a 2980 that did the
Amplifiers
Texas Star dx667v
Thunderbolt - 9/01, 2:14 pm - I have one and I am trying to rebuild

Hope this help's,
Lon~Tech808
CEF#0808/HAM#001/CVC#0002

Tech808@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 599
Registered: 11-2001
Posted on Tuesday, April 01, 2008 - 9:15 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

i think i found the problem,the 2 regulators on the back of the heat sink. well i removed the transformer and caps to the side.i took out those and pluged it back in and rechecked voltage,and i found that the input side wothout the regulator showed 24 or 25 volts so if my voltage is that good before it enters the regulator and very little out the otherside with them in 12 volts and 6 volts when keyed up and the amp is off.so i ordered bigger 2n3771 40 volt 30 amp.maybe this will fix it
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Advanced Member
Username: Jyd

Post Number: 601
Registered: 11-2001
Posted on Thursday, April 03, 2008 - 10:19 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

it is fixed,or it was.a small regulator went out,but i did talk on it for a while first.the new transisters on the back of the radio did the trick.until smoke,i will upgrade those to.and turn the radio down to about 120watts.and i have a good power supply for back up,and alot of 2995dx parts

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: