| Author |
Message |
    
Swamper105
Junior Member
Username: Swamper105
Post Number: 11
Registered: 12-2004
| | Posted on Saturday, April 12, 2008 - 5:51 pm: | 
|
Here we go .I got a 142 gtl it worked great was sent to Delaware and was done up with extras but now on am its still dead keying around 8 watts and receives fine but after a few minuets no transmit of audio on AM and on ssb its moves the modulation meter a hair but no voice its getting threw . so i guess I am trying to say is there is no modulation and seems to have a back swing in power when there is some audio getting threw |
Dale
Senior Member
Username: Dale
Post Number: 1346
Registered: 12-2002
| | Posted on Saturday, April 12, 2008 - 9:41 pm: |
|
sounds like they overtuned the power
or turned the vrs that adjust your meters
on the radio.i suggest hooking up your radio
to a external meter and dummyload and check
like that.also what mike ya using?if mike
is unamplifed youll probaly need to run mic gain
wide open.that 8 watt carrier was that seen with
a external meter.weres mic gain set.need little
more info
dale/a.k.a.hotrod
cef426
cvc#64
|
Swamper105
Junior Member
Username: Swamper105
Post Number: 12
Registered: 12-2004
| | Posted on Sunday, April 13, 2008 - 9:12 am: |
|
well last night I noticed vr7 was burned open so I jumped across what was left and on ssb I get no audio but when I key the mic it pules . I got a print now so I can look to see whats in line with it some thing must be shoted to burn out a VR ..I was useing a dosy meter with mic open an closed it makes no differnce on am no audio getting threw in eather mode . |
Dale
Senior Member
Username: Dale
Post Number: 1347
Registered: 12-2002
| | Posted on Sunday, April 13, 2008 - 4:41 pm: |
|
well sounds like a serious problem.i was hoping
for a simple soluation..lol.hopfully someone
else will chime in that can help more
dale/a.k.a.hotrod
cef426
cvc#64
|
