| Author |
Message |
    
Lucassheehan
New member
Username: Lucassheehan
Post Number: 2
Registered: 4-2008
| | Posted on Monday, May 05, 2008 - 1:04 am: | 
|
I am having a strange problem perhaps someone can help with. I wired up a JCD-201M for a 5pin Cobra using the following color-to-pin setup.
1- brown - mic audio
2- Shield
3- blue - rec (a guess as nothing else worked)
4- white - com
5- green - Transmit
I get good modulation however my recive audio is very quite. If I use the white (ground according to the review on the website) on 3 as receive
I get great receive/speaker audio but the instant I key up I get nothing but squeals. The only way to get it to work seems to be the above wiring however the quite receive audio make me worried. Thoughts? Am I completely off on my wiring? :-)
Cheers,
Lucas
Lucas "Mad Hatter" Sheehan
lucassheehan@gmail.com,
AM-27.165/27.265 2M-146.840
PDX, Oregon
|
Lucassheehan
New member
Username: Lucassheehan
Post Number: 7
Registered: 4-2008
| | Posted on Tuesday, May 06, 2008 - 1:43 pm: |
|
Anyone have any ideas? This is driving me crazy. It just a mic, simple right? Its the little things in life that never work. :-)
Lucas "Mad Hatter" Sheehan
lucassheehan@gmail.com,
AM-27.165/27.265 2M-146.840
PDX, Oregon
|
Hotwire
Senior Member
Username: Hotwire
Post Number: 2479
Registered: 1-2005
| | Posted on Wednesday, May 07, 2008 - 3:50 am: |
|
Lucas, Call the Copper tech. He should be able to help. good luck
KEEP IT REAL!
Kenny
cef491(27.115lsb)
2sf491(27.555usb)
Indiana
|
|
