Copper Talk » Ask The Tech » Radio's Mobile » Galaxy DX88HL « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Fde
Junior Member
Username: Fde

Post Number: 12
Registered: 6-2008
Posted on Sunday, August 17, 2008 - 4:22 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I run the radio as a base.It was turned on,on 27.115,everything was fine.I left the bench for an hour or so and when I came back it was 24.680.It had`nt been changed,but that`s where it was.The channel knob won`t change frequency,nor will the band switch,High/Low Band,10k switch,or clarifier.Also it will not key up.No storms in the area,power surges or anything else that I noticed out of the ordinary.I opened the radio up and everything seems to be plugged in OK.Anyone have any ideas?
Thanks,Freddie
Top of pagePrevious messageNext messageBottom of page Link to this message

Drzuo
Junior Member
Username: Drzuo

Post Number: 45
Registered: 1-2006
Posted on Wednesday, August 20, 2008 - 8:38 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have an 88, I run it in my mobile. The freq counter started bugging out, I went in and re-soldered cold joints replaced parts, re-soldered connections ..everything. It worked perfect for a week, then the counter started to drift again. It wont stay stable on SSB anymore as it can drift 5kc's from 40-70 degrees in temperature. I pushed the band switch before I installed it, and a diode on the freq board blew. I did a complete alignment, replace bad parts, re-soldered cold joints and it works great on am. Oh it also puts a birdie on channel 14 at an s5. I usually just listen to truckers on my drive to work so its ok.

I'd start looking for cold solder connections, I found several, my 88 is 15 years old, and has a lot of miles on it. Its easy to get cracks on traces after being exposed to extreme temps, vibration, humidity etc. Good luck.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fde
Junior Member
Username: Fde

Post Number: 13
Registered: 6-2008
Posted on Thursday, August 21, 2008 - 8:41 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks Drzuo,
I`ll check the solder joints,mine is at least 15yrs. old,and it did live in a truck with my Dad for several years.
Thanks,Freddie
Top of pagePrevious messageNext messageBottom of page Link to this message

Mrclean
Intermediate Member
Username: Mrclean

Post Number: 105
Registered: 12-2003
Posted on Sunday, August 24, 2008 - 2:40 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

They are some great radios on AM. Drift alittle on SSB but I have radios better suited for sideband anyway.I love mine

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: