Copper Talk » Ask The Tech » Microphone Wiring » Zakary T « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bbmfic
Member
Username: Bbmfic

Post Number: 90
Registered: 1-2003
Posted on Saturday, August 30, 2008 - 12:25 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

i have a jcd-201m & need to wire it up to President Zakary-T
Top of pagePrevious messageNext messageBottom of page Link to this message

Hyperno_1979
Advanced Member
Username: Hyperno_1979

Post Number: 729
Registered: 12-2005


Posted on Saturday, August 30, 2008 - 5:55 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

From what i have is the Zachary T was wired as standard Uniden/Cobra 4 pin. Hope this is right as some of my info is out of date so i would double check. Or if it is 5 pin then standard Uniden/Cobra 5 pin. Hope this gets you on the air.
CEFFFCEF
Bob
CEF703/CVC26
703 New South Wales
Top of pagePrevious messageNext messageBottom of page Link to this message

Hyperno_1979
Advanced Member
Username: Hyperno_1979

Post Number: 730
Registered: 12-2005


Posted on Saturday, August 30, 2008 - 6:30 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Cobra/Uniden Mic Wiring is:
4 Pin:
Pin #1 ~ Shield
Pin #2 ~ Audio
Pin #3 ~ Transmit
Pin #4 ~ Receive

And also for 5 pin:
Pin1=Audio
Pin2=Shield
Pin3=Receive
Pin4=Switching Wire
Pin5=Transmit

Standard JCD 201M Wiring:
PIN #1 = SHIELD ~ SHIELD / MIC -
PIN #2 = BROWN ~ AUDIO / MIC +
PIN #3 = WHITE ~ COMMON
PIN #4 = GREEN ~ PTT
PIN #5 = BLACK ~ CH UP
PIN #6 = YELLOW ~ CH DOWN
PIN #7 = BLUE ~ CH COMMON
PIN #8 = RED ~ V + Supply to Mic

Thanks to Lonnie for all the info.
Hope this gets you on air.
CEFFFCEF
Bob
CEF703/CVC26
703 New South Wales

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: