Author |
Message |
Port_richey_kidd
New member Username: Port_richey_kidd
Post Number: 1 Registered: 9-2008
| Posted on Saturday, September 20, 2008 - 3:51 am: |
|
Afriend got a sadelta for a 2995 and wanted to know how to wire it if any one can help thanks i told him i wont put it on there but thats just me |
Hyperno_1979
Advanced Member Username: Hyperno_1979
Post Number: 745 Registered: 12-2005
| Posted on Saturday, September 20, 2008 - 6:29 am: |
|
At the left under tools click on mic wiring, choose radio from the drop down box and then mic. CEFFFCEF Bob CEF703/CVC26 703 New South Wales
|
Port_richey_kidd
New member Username: Port_richey_kidd
Post Number: 2 Registered: 9-2008
| Posted on Saturday, September 20, 2008 - 2:36 pm: |
|
I don't know what your talking about i don't see a tools button on the left |
Tech237
Moderator Username: Tech237
Post Number: 1061 Registered: 4-2004
| Posted on Saturday, September 20, 2008 - 3:35 pm: |
|
He didnt say tool button. Look at the list to the left of the messages, and you will see a folder marked tools. Under that folder is a section called Mic. Wiring Simon Tech237 N7AUS
|
Hyperno_1979
Advanced Member Username: Hyperno_1979
Post Number: 746 Registered: 12-2005
| Posted on Saturday, September 20, 2008 - 5:26 pm: |
|
This is straight off the list. For a 2990 but will be exactly the same. Sadelta: Pin1=Shield Pin2=White Pin3=Brown Pin4=Green Pin5=N/C Pin6=N/C Yellow-N/C There you go champion. That should get her up and running. Regards, Bob. CEFFFCEF Bob CEF703/CVC26 703 New South Wales
|