Author |
Message |
Biskybabyusa
Member Username: Biskybabyusa
Post Number: 77 Registered: 11-2006
| Posted on Wednesday, December 03, 2008 - 8:54 pm: |
|
Could someone give me the wiring for a JCD-201M to a Cobra 2000 ? Thanks, Jim |
N8fgb
Member Username: N8fgb
Post Number: 54 Registered: 5-2002
| Posted on Thursday, December 04, 2008 - 11:34 am: |
|
1-Audio 2-Shield 3-Receive 4-Switching Wire 5-Transmit listed on the left under tools. rich |
Biskybabyusa
Member Username: Biskybabyusa
Post Number: 78 Registered: 11-2006
| Posted on Thursday, December 04, 2008 - 8:21 pm: |
|
Thanks Rich ! Copper wired it for me and it works fine with my Jumper to my Galaxy 2537 and RCI 2990, but squeals like the devil on the washington and Cobra 2000. Turned both mic gains down and still does it on those 2.Do you know of anyone that has had that mic work on a 2000 or uniden washington ? Thanks, Jim |
Bluemoonpc
New member Username: Bluemoonpc
Post Number: 2 Registered: 11-2009
| Posted on Friday, January 01, 2010 - 8:17 pm: |
|
I too ordered this mike this past weak and have the same problem. it seems that there is no switching off of the rx ground when the ptt button is pushed. had copper wire it. I checked the pins on the back of the mike and couldnt find a switching ground What could be wrong?? is it suppose to be that way? if so how do you get it to work with uniden washington with 5 pin? |
Dale
Senior Member Username: Dale
Post Number: 1534 Registered: 12-2002
| Posted on Saturday, January 02, 2010 - 2:06 pm: |
|
is this wired striaght for the 5 pin? if so try rewiring it for a standard 4 pin thebn use those adapter to a 5 pin might help how ya got the gains set on the mic dale/a.k.a.hotrod cef426 cvc#64
|
Bluemoonpc
New member Username: Bluemoonpc
Post Number: 3 Registered: 11-2009
| Posted on Sunday, January 03, 2010 - 5:36 pm: |
|
I tried turning the gain off on the radio and the mike in manual mode it still will squeal loudly because the recieve is not switched off when transmitting.It came wired pin 1 brown-audio pin 2 shield pin 3 white-common pin 4 blue pin 5 green-transmit I switched the blue and white and get transmit but no recieve with an ohm meter i could find no ground that switches off when you transmit like my d104 tup9 does. could i have a defective mike? or is there a way to get it to work. I really want to use this mike. hopefully a tech will come in and help me out. Thanks |
Bluemoonpc
New member Username: Bluemoonpc
Post Number: 4 Registered: 11-2009
| Posted on Monday, January 04, 2010 - 10:08 pm: |
|
UPDATE: called the copper tech today and found out there are some 5 pin washington and 2000 radios that this mike wont work with without modification.although a rare problem. I do have one of these older transitional radios. mine doesnt say uniden but has the five pins.although i could return it I still think this is a really cool looking mike and cant wait to try it and hear the difference compression makes.I guess its time for mr washington to have a younger brother lol. thanks Dale and copper tech for your response |
Tommyhawk
New member Username: Tommyhawk
Post Number: 6 Registered: 3-2009
| Posted on Thursday, January 14, 2010 - 5:17 pm: |
|
can we send them back if they don't work on uniden washingtons>? Moderator Note! You would need to contact Suzanne in Customer Service. |
Tommyhawk
New member Username: Tommyhawk
Post Number: 7 Registered: 3-2009
| Posted on Thursday, January 14, 2010 - 5:18 pm: |
|
Got mine today in the mail hooked up and squeal man i mean squeal.lolcan they be fixed? |
Bluemoonpc
New member Username: Bluemoonpc
Post Number: 6 Registered: 11-2009
| Posted on Tuesday, January 19, 2010 - 3:47 pm: |
|
I think it has to do with how the radio switches the recieve off when transmitting. they said they would take mine back but i kepted it to use on a newer base when i get it. on my radio the ground has to be switched off when transmitting or you get the squeal.my d104 has a triple switch inside that does this. with an ohm meter i couldnt find a wire that would do this on pin 3 the recieve.if anyone has a solution i would like to know. Thanks |
Tommyhawk
New member Username: Tommyhawk
Post Number: 9 Registered: 3-2009
| Posted on Wednesday, January 20, 2010 - 9:18 pm: |
|
Workrd on 142 cobra but sounded like dead hand mike? |
Bluemoonpc
New member Username: Bluemoonpc
Post Number: 9 Registered: 11-2009
| Posted on Friday, February 19, 2010 - 9:54 pm: |
|
UPDATE..I GOT IT TO WORK!! I went to radio shack and bought a 12 volt SPDT pc relay for less than 5 bucks and then wired it in my radio by hooking the solenoid to 12v+ at the power volume switch and negative to pin 5 of the mike connector wich had a wire going to the squelch-pa switch so i soldered it there (easy hook up)I then cut the wire going from pin 3 (recieve) to the speaker and soldered them to the normaly closed legs of the relay and that was it. now when the ptt button is pushed the relay shuts down the speaker the same way my d104 did.WOOHOO now im playing with it on the air and already i get reports of clearer and louder audio and my d104 still works too with this simple mod. hope this helps those that have these older 5 pin configurations. mine is a washington with 5 pins three push buttons and says washington under the channel indicator and president on the speaker (no uniden label)Now lets try some skip Chuck |