Copper Talk » Ask The Tech » Radio's Mobile » Galaxy 99v no modulation « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Scorpion
Junior Member
Username: Scorpion

Post Number: 17
Registered: 4-2004
Posted on Friday, September 04, 2009 - 10:50 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

has audio in pa mode . but not in am fm or ssb.shows low carrier but no modulation. rx works fine.. replaced all TR33 through TR51 and a hand full of caps on the right side..
Top of pagePrevious messageNext messageBottom of page Link to this message

Five
Junior Member
Username: Five

Post Number: 19
Registered: 7-2009
Posted on Monday, September 07, 2009 - 5:48 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Scorpion, if it has audio through the PA then the modulator should be good. I would check the driver and the final to make sure they are good. Usually if the driver is good you would get a low carrier with audio but it would only transmit a small distance because the final would be out. I would check them first then you would have a better idea as whether it is between the modulation transformer and the driver and final also check the transformer. I am not a radio tech but I have fixed a couple 88 and 99 with similar problems. Hope this helps...

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: