Copper Talk » Ask The Tech » Ham Gear » ICOM 706 MICROPHONE WIRING ISSUES « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Groundcontrol1
Junior Member
Username: Groundcontrol1

Post Number: 44
Registered: 2-2003
Posted on Monday, January 18, 2010 - 4:27 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Ok so I have icom 706 radios both in the mobile and base. I have adapters to turn the modular plug into a standard icom 8 pin round. I have been toying around with echo boxes and roger beeps etc. How to i wire this up? my d104 desk mic is wired so pin 1 supplys power to the d104.. im stumped. can an external echo box be added? maybe even a simple 8 to 4 pin conversion might help? ideas techs?
Top of pagePrevious messageNext messageBottom of page Link to this message

Patzerozero
Senior Member
Username: Patzerozero

Post Number: 4777
Registered: 7-2004


Posted on Tuesday, January 19, 2010 - 12:29 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

http://www.icomamerica.com/support/documents/index.html

Round | RJ45
1 | 6
2 | 1
3 | 2
4 | 8
5 | 6
6 | 7
7 | 5
8 | 3

http://www.tigertronics.com/sl_wirebm.htm

http://www.tigertronics.com/sl_wirebm.htm#ICOM

all i can say is.....have fun !!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech237
Moderator
Username: Tech237

Post Number: 1282
Registered: 4-2004


Posted on Tuesday, January 19, 2010 - 10:20 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

If you use an echo box on ham bands, be prepared to be jumped on.

Make you own adaptor from an ethernet cable, a 8 pin socket and ethernet floor mount jack. I plug the cable into the jack and the RJ45 socket on the 706, then play mix and match with the 8 wires from the mic socket to make it work with my Turner Desk mic.

RJ45
1 - +8v at 10mA
2 - Up/Down
3 - AF from radio
4 - PTT
5 - Mic ground
6 - Mic
7 - Gnd
8 - Squelch
Tech237
N7AUS

Chipmonks roasting on an open fire
Hot sauce dripping from their toes.
Top of pagePrevious messageNext messageBottom of page Link to this message

Groundcontrol1
Junior Member
Username: Groundcontrol1

Post Number: 45
Registered: 2-2003
Posted on Tuesday, January 26, 2010 - 11:54 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

the 706's i have are modded for 11 meter so hence the noise toys! I now also have an icom 746 with the the 8 pin round. figuring this out is a bear! pin 1 shorting will smoke the regulator in the radio! i did make the adaptor from rj45 to 8 pin works great!

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: