Author |
Message |
Golden_screw_driver
Intermediate Member Username: Golden_screw_driver
Post Number: 168 Registered: 2-2008
| Posted on Tuesday, October 12, 2010 - 9:16 am: |
|
I picked up this radio as a project from craigs list and own one new from copper. First it has the switch mod for the amp, with the amp off it will hold dead key at 4 watts output with no problem, when the switch is turned on the radio will key 40-80 watts and hold it for around 6 second and will start to drop dramasticly 50 to 20... 150 to 50 ???? i am thinking the power supply or the amp it self. the radio IS SMT with 1446 on the amp section ... any in put on this would be great... forhead starting to bruse from slamming the desk.. 421 GOLDEN SCREW DRIVER CEF#0995 NORTH-EAST CEF NET CONTROLLER Channel 13 / 27.115 AM/LSB
|
Dale
Senior Member Username: Dale
Post Number: 1629 Registered: 12-2002
| Posted on Tuesday, October 12, 2010 - 7:38 pm: |
|
leave usd know .i gotta local here that his radio is doing similar to that but slightly different.but i need to check his antenna and coax first for shorts.did u use a dummy load to get these readings dale/a.k.a.hotrod cef426 cvc#64
|
Golden_screw_driver
Intermediate Member Username: Golden_screw_driver
Post Number: 170 Registered: 2-2008
| Posted on Wednesday, October 13, 2010 - 9:50 am: |
|
yes it was checked on a 500 watt dummy load. Meter is 43p Bird with pep kit. been testing voltage and all seem's good , this is puzzling for sure. this morning i set it to 40 watt dead key no mike gain and threw a dead key for around 3 min, at one and a half min in power started to slowly decrese......But not to zero it will rop to around 10 watts or so.. Unkey and key back up and same thing 40 watt dead then starts dropping again. 421 GOLDEN SCREW DRIVER CEF#0995 NORTH-EAST CEF NET CONTROLLER Channel 13 / 27.115 AM/LSB
|
Charliebrown
Intermediate Member Username: Charliebrown
Post Number: 117 Registered: 10-2002
| Posted on Wednesday, October 13, 2010 - 4:46 pm: |
|
In what I have seen usually if it slowly start to loose power it is the 1446. You might want to put an amp. meter and a volt meter to check the power supply. But, I still think you will find it is the 1446 being your problem. If I am wrong let me know, I could and alway's want to learn something new. Not every radio or problem is alike. |
Golden_screw_driver
Intermediate Member Username: Golden_screw_driver
Post Number: 171 Registered: 2-2008
| Posted on Wednesday, October 13, 2010 - 7:42 pm: |
|
charliebrown, That is what i was checking next, and that is exactly what it is doing losing it slowly. the guy who had this had it jacked im thinking it had the poop bet out off it....I will let you know. 421 GOLDEN SCREW DRIVER CEF#0995 NORTH-EAST CEF NET CONTROLLER Channel 13 / 27.115 AM/LSB
|
Golden_screw_driver
Intermediate Member Username: Golden_screw_driver
Post Number: 174 Registered: 2-2008
| Posted on Tuesday, October 26, 2010 - 7:52 am: |
|
1446 came in today and will be changing them out later tonight. I will let you know what happens..... 421 GOLDEN SCREW DRIVER CEF#0995 NORTH-EAST CEF NET CONTROLLER Channel 13 / 27.115 AM/LSB
|