| Author |
Message |
    
Radioreddz
Intermediate Member
Username: Radioreddz
Post Number: 108
Registered: 9-2006
| | Posted on Sunday, January 08, 2012 - 2:32 pm: | 
|
sometimes when talking on my RCI 2950Dx it will change channels by itself when i unkey the mic. i'm using a astatic night eagle and it does it even when i try other mics. |
Funtimebob
Intermediate Member
Username: Funtimebob
Post Number: 345
Registered: 5-2002
| | Posted on Monday, January 09, 2012 - 12:37 am: |
|
Is it a older model that uses a battery Inside.
wonder if it needs a new internal battery.
Dyslexics of the world UNTIE!
No I'm not a Tech,I just know enough to be a nuisance.
|
Charliebrown
Intermediate Member
Username: Charliebrown
Post Number: 242
Registered: 10-2002
| | Posted on Monday, January 09, 2012 - 7:53 am: |
|
I have had many of the dx radio's base and mobile. I have never had this problem. I think you might want to recheck the the way your mic. had been wired. Try another mic. to see if it still does this. If it does not do this with another mic. then you know where to look at. |
Moonraker
Intermediate Member
Username: Moonraker
Post Number: 306
Registered: 3-2005
| | Posted on Monday, January 09, 2012 - 10:32 pm: |
|
I agree with charliebrown. My 2970 had the buttons on the stock mic to change channels. I'm assuming the 2950 is the same way and if the wiring on your mic is shorting to the right pin it will change the channel. |
Radioreddz
Intermediate Member
Username: Radioreddz
Post Number: 109
Registered: 9-2006
| | Posted on Monday, January 09, 2012 - 10:53 pm: |
|
yup the problem was in the mic connector in the radio lose connection inside. |
