Copper Talk » Ask The Tech » Microphone Wiring » Turner +2 to Galaxy DX 2547 Base « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mt908
New member
Username: Mt908

Post Number: 3
Registered: 9-2011


Posted on Monday, January 09, 2012 - 6:57 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have an old Turner Plus 2 with a 3 pin connector that I'd like to hook up to a Galaxy 2547 Base Station with a 4 pin. I bought the connector from Copper and would like to know the wiring color codes and numbers etc. are for both.

Any help would be appreciated!
Guy
<B>"From My Radio Wave To Yours. May They Never Double."</B>

<B>MT908</B>
Top of pagePrevious messageNext messageBottom of page Link to this message

Funtimebob
Intermediate Member
Username: Funtimebob

Post Number: 347
Registered: 5-2002


Posted on Tuesday, January 10, 2012 - 8:51 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

1 shield
2 white
3 black
4 red
Dyslexics of the world UNTIE!
No I'm not a Tech,I just know enough to be a nuisance.

Top of pagePrevious messageNext messageBottom of page Link to this message

Scrapiron63
Advanced Member
Username: Scrapiron63

Post Number: 899
Registered: 12-2001
Posted on Tuesday, January 10, 2012 - 11:29 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

IF it's the old Turner plus 2 with a 4 wire cord, it should wire like this.

1. shield
2. white
3. black
4. red
Top of pagePrevious messageNext messageBottom of page Link to this message

Stahlmaster
New member
Username: Stahlmaster

Post Number: 1
Registered: 4-2012
Posted on Friday, April 13, 2012 - 6:55 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have a Galaxy DX2547 with a Turner +2 mic. I'm trying to get the settings right. My radio checks say I sound like I'm off frequency. What can be the issue here?
Top of pagePrevious messageNext messageBottom of page Link to this message

Press_man
Intermediate Member
Username: Press_man

Post Number: 477
Registered: 5-2008
Posted on Sunday, April 15, 2012 - 6:48 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Have you checked the mic cartridge?
Chech for a mismatch in impedance.
Might be the board in the +2.
Pressman/KC4ZWM
Top of pagePrevious messageNext messageBottom of page Link to this message

Stahlmaster
New member
Username: Stahlmaster

Post Number: 2
Registered: 4-2012
Posted on Thursday, February 20, 2014 - 8:36 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The problem was a bad connection at the antenna. I was going into a switch and one of the coax was loose.
Galaxy 2547
Royce 1-620
Royce 619
Cobra 29LTD Classic
Uniden PC76XL
Top of pagePrevious messageNext messageBottom of page Link to this message

Stahlmaster
New member
Username: Stahlmaster

Post Number: 4
Registered: 4-2012
Posted on Thursday, February 20, 2014 - 9:08 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The problem was a bad connector at the switch. I was using two antennas and one of the connectors was bad. All good now
Galaxy 2547
Royce 1-620
Royce 619
Cobra 29LTD Classic
Uniden PC76XL

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: