| Author |
Message |
    
Justin_383
New member
Username: Justin_383
Post Number: 1
Registered: 6-2012
| | Posted on Thursday, June 28, 2012 - 9:27 pm: | 
|
I want to put the RFX75 RF Driver on my Cobra 148 GTL. First of all can that be done and second can I put a variable power pot on it case I want to run this into a AMP.
I have a Cobra 148 GTL made in Taiwan (5-Pin Mic)
The RFX75 RF Driver I will but will be the one off the website.
If you need anymore information let me know. Thanks |
Spiderleggs
Member
Username: Spiderleggs
Post Number: 50
Registered: 5-2002
| | Posted on Friday, June 29, 2012 - 4:27 pm: |
|
Here is a link to the early and later models of the 148.
http://www.cbtricks.com/miscellaneous/accessories/power_band/rfx_75/index.htm |
Justin_383
New member
Username: Justin_383
Post Number: 2
Registered: 6-2012
| | Posted on Saturday, June 30, 2012 - 12:55 am: |
|
Thanks Spider legs that helps alot but do you know if you can put a variable power pot on as well.
27.1650 shout for 383
|
Dale
Senior Member
Username: Dale
Post Number: 1866
Registered: 12-2002
| | Posted on Friday, July 06, 2012 - 10:26 pm: |
|
just watch what amp you use with it.cause the pep
will problay be around 50-80 watts pep
dale/a.k.a.hotrod
cef426
cvc#64
|
Justin_383
New member
Username: Justin_383
Post Number: 6
Registered: 6-2012
| | Posted on Sunday, July 08, 2012 - 1:45 pm: |
|
Ya I know but I will need to turn that down because the full PEP is to much for the amp. Im thinking of taking out VR10 and hooking up a Variable power pot. on the front of the radio. Possibly a duel knob and put it where the dynamic is on the front so I don't lose the dynamic.
27.1650 shout for 383
|
