| Author |
Message |
    
Captain_kirk
New member
Username: Captain_kirk
Post Number: 1
Registered: 2-2015
| | Posted on Thursday, February 12, 2015 - 7:02 pm: | 
|
trying to align lsb xmit I have the receiver usb and lsb done and usb xmit but lsb xmit is off ,and I don't see it in the service manual for lsb xmit,any thoughts thanks Kirk |
Press_man
Advanced Member
Username: Press_man
Post Number: 825
Registered: 5-2008
| | Posted on Saturday, February 14, 2015 - 6:06 pm: |
|
If you have the service manual I'm looking at, go to Alignment Procedure item 3 stem 5. Adjust VR 106
so carrier leakage at USB and LSB are minimal and almost equal.
Welcome to the Forum.
73 Pressman
|
Captain_kirk
New member
Username: Captain_kirk
Post Number: 2
Registered: 2-2015
| | Posted on Sunday, February 15, 2015 - 10:31 am: |
|
I will give that a shot and let you know how I turn out on the 2510 thanks for the help ,kirk... |
Dale
Senior Member
Username: Dale
Post Number: 2180
Registered: 12-2002
| | Posted on Monday, February 16, 2015 - 7:08 pm: |
|
i am in the process of aligning a 2510
and i cant find 2 adjustment. this is for
the reciever
1/L-401 FM
2/NOISE GEN. OUTPUT
right now it has good recieve but with the volume knob all way down it still has noise coming thru it and i cant find these adjustments anywhere. sorry for hijacking this
kirk try adjusting vr-111 to get LSB in
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
