Author |
Message |
Doc053
New member Username: Doc053
Post Number: 2 Registered: 9-2015
| Posted on Tuesday, September 15, 2015 - 10:40 pm: |
|
I am having nothing but trouble trying to wire this mic to the 6 pin connector. If anyone has successfully figured out how to wire the mic into the 980 let me know please. Thanks |
Press_man
Advanced Member Username: Press_man
Post Number: 880 Registered: 5-2008
| Posted on Wednesday, September 16, 2015 - 5:47 pm: |
|
Howdy Doc and welcome to Copper Forum! Look under Mic Wiring in Ask The Tech. I posted the pin out for the 980. Note that one or two of the pins depending on the mic will be N/C. 73 Pressman
|
Dale
Senior Member Username: Dale
Post Number: 2234 Registered: 12-2002
| Posted on Friday, September 18, 2015 - 5:16 pm: |
|
pressman that is this section dale/a.k.a.hotrod cef426 cvc#64 454 [dx numbers] 38lsb
|
Revpo
Advanced Member Username: Revpo
Post Number: 782 Registered: 7-2006
| Posted on Friday, September 18, 2015 - 8:29 pm: |
|
just use an adaptor, I got one with my radio. CEF 795 73 REVPO/DOCTOR/CEF 795 Wavin a hand from the cornfields of INDIANA
|
Doc053
New member Username: Doc053
Post Number: 3 Registered: 9-2015
| Posted on Sunday, September 20, 2015 - 4:43 pm: |
|
Turner plus 2 electronic/relay switch underneath the base of the microphone. Does anyone know the position of the switch (forward or back) for electronic switching. I can't find it on any of the turner manuals. I purchased the mic on E-bay and I am not sure what position it is in. So, if held upside down should the switch be toward the battery or moving away from the battery for electonic switching. Thanks |
Press_man
Advanced Member Username: Press_man
Post Number: 883 Registered: 5-2008
| Posted on Tuesday, September 22, 2015 - 3:35 pm: |
|
1.Yellow audio hot 2.Black RX switching 3.Red TX switching 4.No connect 5.Shield 6.7.8 VDC phantom power for power mic with need of ext. power or N/C 73 Pressman
|
Dale
Senior Member Username: Dale
Post Number: 2238 Registered: 12-2002
| Posted on Sunday, September 27, 2015 - 1:02 pm: |
|
doc053. once u wire it as pressman posted . then just try both positions. one position wont work then switch it other position will work if mic is wired correctly.i think you want electronic but im not sure so id wire it then try both settings dale/a.k.a.hotrod cef426 cvc#64 454 [dx numbers] 38lsb
|
Seaview
New member Username: Seaview
Post Number: 4 Registered: 12-2015
| Posted on Sunday, February 28, 2016 - 4:57 pm: |
|
Press man:This wiring,is from the solder side? Will this apply to a Turner Super Sidekick? |