| Author |
Message |
    
Nighthawk
Junior Member
Username: Nighthawk
Post Number: 23
Registered: 5-2002
| | Posted on Wednesday, April 13, 2016 - 5:31 pm: | 
|
MY 2995 can be set at 1/2 W DK and swing you know... I understand this is probably too much PEP for the TS 500 but it sure does make my meter go up.
The TS 500 is a class AB if I understand correctly,and shouldn't hit it with the 2995, can I run a Dave Made or Fatboy 4 pill class C with my 2995? What amp would be a good choice for my 2995 for <1KW swing?
Thanks,
Nighthawk |
Confederate_k5
New member
Username: Confederate_k5
Post Number: 8
Registered: 4-2009
| | Posted on Friday, April 15, 2016 - 10:31 am: |
|
Personally, Id have someone put an on/off switch on the radio's internal amp. Then you could run the TS 500 without Killing It.
Traveler
South Carolina
|
Dale
Senior Member
Username: Dale
Post Number: 2279
Registered: 12-2002
| | Posted on Sunday, April 17, 2016 - 4:40 pm: |
|
on ssb you can turn down ya rf power to bout 40-50 watts pep. and you,ll be fine. on am mode 1-2 watt dead key then lower mic gain so pep is no mre than 40-50. asuming ya only using a non powered mic.
other choice is a texas star 1600 and 1600v
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
