| Author |
Message |
    
155ALAMO
| | Posted on Thursday, August 09, 2001 - 7:42 pm: | 
|
ANY SWING MODS AVAIL. FOR THE 2950 DX
WITH EPT695011Z?
NOT TALKING ABOUT CRANKING THE VR'S. |
155ALAMO
| | Posted on Saturday, August 18, 2001 - 10:37 pm: |
|
GUESS NOT........ |
Anonymous
| | Posted on Sunday, August 19, 2001 - 3:24 pm: |
|
build an external box that limits the negative peaks and amplifies the positive peaks. in a nutshell. |
Skullman
| | Posted on Sunday, August 19, 2001 - 12:33 pm: |
|
Alamo email me at skullman858@yahoo.com and I'll send you what I have.
CEO of DEADMAN INC. |
The Inspector
| | Posted on Friday, October 05, 2001 - 7:13 pm: |
|
Go to Panther Electronics Forums at http://panther-electronics.com/portal/content/content.asp?sectionid=6 There is a heavy swing mod and a similar negative peak compression mod described and discussed there. |
Gator
| | Posted on Tuesday, January 13, 2004 - 2:15 am: |
|
Help- tuneup for Superstar SS.36 |
Tech808
| | Posted on Tuesday, January 13, 2004 - 10:46 am: |
|
Gator,
Since you only listed SS 36 not sure which model you mean so here are all three.
SS-360 (Early Model)
Modulation: Cut R104
AM Power: Adjust VR6
SSB Power: Adjust VR7
SS-360FM
Modulation: Adjust VR14 or Cut R301
AM Power: Adjust VR 13
SSB Power: Adjust VR12
SS-3600
Modulation: Adjust VR14 or Cut R249
AM Power: Adjust VR13
SSB Power Adjust: VR12
Hope this helps.
Lon
Tech808 |
Kc0gxz
| | Posted on Friday, January 16, 2004 - 3:45 pm: |
|
155ALAMO. I hope this may help you.
A NPC modification can be done on the EPT-6950 board in the 2950/70-DX.
1-Cut or remove R-301 to open-up the AM modulation. SSB modulation will be uneffected.
2-Solder a 100 ohm resistor to a 1N4001 diode.
3-With the radio facing you, add this combination parelleld with R-292 making sure the cathode (banded end) of the diode is to the right.
These parts can be difficult to locate without the parts layout of the radio since you are playing with "Surface Mounted Parts" here.
Good luck.
Jeff, kc0gxz. |
Weakeststation
Intermediate Member
Username: Weakeststation
Post Number: 258
Registered: 7-2002
| | Posted on Wednesday, April 28, 2004 - 2:24 pm: |
|
Weakest-Station@lyco.com
I to will pass on what i know... |
