Author |
Message |
Swamper
| Posted on Wednesday, November 13, 2002 - 11:09 pm: |
|
On my eagle tomahawk when im on sideband only ,the signal meter will stick at 3 or 5 after someone unkeys.i went to am then back to sideband, i even shut the radio off then back on but it didnt fix the problem.why is it doing this and how do it fix it?thanks 307! |
307
| Posted on Thursday, November 14, 2002 - 7:22 am: |
|
The meter movement is "stuck"..It is not the radio. Do you smoke? Nicotine kills meters. Either way you can remove the front panel and trim the screw in the front of the meter to loosen it up..There is also a screw on the back of the meter..BE GENTLE with it.. 307 |
Swamper
| Posted on Thursday, November 14, 2002 - 9:31 am: |
|
I will give it a try thanks so much 307,and no i dont smoke,but i bought it used so who knows what the guy before me did to it. |
Swamper
| Posted on Monday, November 18, 2002 - 2:36 am: |
|
307 i tryed to turn the screw on the front of the meter but i cant get it to move.i had to get a very small jewelers screw driver to fit in the little screw but i still cant loosen it at all.do you have any idea what size screw driver that little screw would take?.the one im using is to short.i didnt see any screw on the back.thanks |
307
| Posted on Monday, November 18, 2002 - 1:34 pm: |
|
First use and EXACTO KNIFE and clean off the Locktite that is on the screw...This will do the trick... 307 |
Radiodude
| Posted on Monday, November 18, 2002 - 10:16 am: |
|
Open the radio up...then look on the back of the meter...there is a small screw there.. spray it with some contact cleaner ...then use a small screw driver. That should do it. Mine had a stuck meter and thats how I fixed it. |
Swamper
| Posted on Monday, November 18, 2002 - 10:02 pm: |
|
i will give it a try thanks guys! |
Swamper
| Posted on Wednesday, November 20, 2002 - 8:36 pm: |
|
when you say theres a screw on the back of the meter all i see is a white plastic cover on the back do i have to take it off? |
307
| Posted on Thursday, November 21, 2002 - 10:30 am: |
|
Yes you do. There is a tiny set screw located inside behind the meter coil 307 |