| Author |
Message |
    
Ceaz
| | Posted on Sunday, January 26, 2003 - 3:41 pm: | 
|
I recently got a Astatic d104 with a G base. I need info on wiring for a Cobra 25? I pulled the plug off the desk mike and I only have 3 wires counting the shield. The shield goes to pins 1 and 4, The brown or red goes to pin 2, and the clear on goes to pin 3. That is coming from the desk mike. From the Cobra I have the common Red, Black, White, and Shield. So if anyone can help I would appreciate it...
Thanks
Chris in AZ |
Tech808
| | Posted on Sunday, January 26, 2003 - 8:24 pm: |
|
Ceaz,
You will not be able to hook up the OLD STYLE G Stand to the 25.
With the Cobra 25 STOCK Wiring you need:
Pin ~ #1 Shield / Ground
Pin ~ #2 Audio
Pin ~ #3 Transmit
Pin ~ #4 Receive
Electronic Switching
You will need the TUG-8 or TUG-9 Stand.
Just not enough wires in the old G Stand.
Lon
Tech808 |
Ceaz
| | Posted on Sunday, January 26, 2003 - 10:07 pm: |
|
Thanks Tech 808.
So what can I use the old G base on?
Thanks again for the info. Ill be looking forward to your responce on what I can use it for.
Chris in AZ |
Tech808
| | Posted on Wednesday, January 29, 2003 - 8:47 pm: |
|
Ceaz,
Most of the older G Base's were used on the radios that have the old PHONO type plug or the older radios like the Brownings and Trams & others that were made before the power mics became popular.
From the First Generation of Astatic Desk Mic's.
Lon
Tech808 |
|
