| Author |
Message |
    
Jyd
| | Posted on Thursday, February 13, 2003 - 2:36 pm: | 
|
i got one that a ham operator had and. was wondering if it has to be converted for 11 meter.keys, but no output.very clean ,nice.it is one that has coax out and input is a rca jack,but i made a adapter for that.anyone |
Jyd
| | Posted on Friday, February 14, 2003 - 4:21 pm: |
|
i know there is a amp person out there. |
Jp1116
| | Posted on Saturday, February 15, 2003 - 3:23 pm: |
|
If it has a 10 meter position, it will tune up and have output on 11 meters. |
Jyd
| | Posted on Saturday, February 15, 2003 - 6:40 pm: |
|
it has a 10 meter spot but,no output,also it keys.it was a ham operators rig exelent condition.centron 572 b's.very clean,it will key with the pedal.but nothing out not even radio power out.when it is not keyed i get radio power but when i key it nothing.any ideas anyone |
Jyd
| | Posted on Saturday, February 15, 2003 - 9:52 pm: |
|
someone told me you had to clip a wire or something |
Crafter
| | Posted on Sunday, February 16, 2003 - 8:52 pm: |
|
No but you can add solder to the coil and make it shorter use a clip till you get it right then shorten it. But it should work on the 10m switch on 11 meters. |
2600
| | Posted on Friday, February 21, 2003 - 12:55 am: |
|
Sounds to me more like it's just plain broke. When you key the footswitch with no drive and the meter switch set to "Plate", you should see a small reading on the meter, around the first digit mark up from zero. If it won't do this, it really is broke.
73 |
N4ari
| | Posted on Saturday, April 05, 2003 - 8:23 pm: |
|
Do a search on eham.net or qsl.net under radio mods for the 10 meter mod. The 10 meter position works fine on 11 meters with no special tuning. |
|
