| Author |
Message |
    
Stitches
| | Posted on Saturday, March 29, 2003 - 3:05 pm: | 
|
I have a Pace #CB-144 23 ch., But no Mic. for it, I have an old Midland International Mic. both radio and Midland Mic. are 4 pin.
I need to hook them up can this be done? If so could some one give me the wiring spec. for this? and would you also include the wire color too?
The wire color on the Midland Mic. is:
BLACK
SHIELD
RED
WHITE
Thank you for your time. |
Tech808
| | Posted on Saturday, March 29, 2003 - 7:03 pm: |
|
Stiches,
With Plugging three OLD PACE Mics into my Mic Tester to the MIDLAND PLUG all transmitted on it.
Should be able to just plug it in and it should work unless Mic is bad or Radio.
Hope this Helps.
Lon
Tech808 |
Stitches
| | Posted on Saturday, March 29, 2003 - 8:19 pm: |
|
Lon
Thanks for the responce, I should have mentioned that the Midland Mic. doesn't have a plug on it's end so I'm kinda stumped here. |
Tech808
| | Posted on Sunday, March 30, 2003 - 9:40 pm: |
|
Stitches,
Midland should be:
Pin #1 ~ RED
Pin #2 ~ SHIELD
Pin #3 ~ BLACK
Pin #4 ~ WHITE
GOod Luck.
Lon
Tech808 |
Stitches
| | Posted on Monday, March 31, 2003 - 6:47 am: |
|
Thanks Lon |
|
