| Author |
Message |
    
Hackindave
| | Posted on Saturday, August 30, 2003 - 9:28 pm: | 
|
I have a D104 TG8 that is a 4 wire. I need to know how to wire this mike to this radio. I remember there being a way to add a jumper wire that makes it work with no squeal.. |
Tech808
| | Posted on Saturday, August 30, 2003 - 10:38 pm: |
|
Hackindave,
D104 T-UG8 to Madison:
Madison (PLL 858 Chip)
Pin #1 ~ Shield
Pin #2 ~ White
Pin #3 ~ Red
Pin #4 ~ Black
Electronic
Madison with (PLL 8719 Chip)
Pin #1 ~ White
Pin #2 ~ N/C
Pin #3 ~ Black
Pin #4 ~ Shield
Pin #5 ~ Red
Hope this help's.
Lon
Tech808 |
Xlaxx
| | Posted on Sunday, August 31, 2003 - 10:56 pm: |
|
808-
What's the difference between this mic (TG8 4 wire) and the D104 T-UG9 (5 wire) Stand?
How do I wire a D104 T-UG9 (5 wire) to a 5 pin Madison w/ 8719 PLL?
Thanks
XLAXX |
Tech808
| | Posted on Monday, September 01, 2003 - 1:31 am: |
|
Xlaxx,
T-UG9 is newer version.
Madison 8719 to T-UG9
Pin #1 ~ White
Pin #2 ~ Shield
Pin #3 ~ Black
Pin #4 ~ Blue
Pin #5 ~ Red
Yellow N/C
Lon
Tech808 |
Xlaxx
| | Posted on Monday, September 01, 2003 - 1:23 pm: |
|
Thanks Lon! |
Kirk_t
New member
Username: Kirk_t
Post Number: 2
Registered: 6-2012
| | Posted on Friday, September 14, 2012 - 7:16 pm: |
|
I wired an Astatic Silver Eagle Mic to a fourth and last generation Madison, the one with the digital clock and 8719 PLL as follows. There is no audio! I checked to make sure there is no short and didn't find any. Where do I go from here? Did I wire it correctly?
Pin #1 ~ White
Pin #2 ~ Shield
Pin #3 ~ Black
Pin #4 ~ Blue
Pin #5 ~ Red
Yellow N/C |
Jon666
Intermediate Member
Username: Jon666
Post Number: 478
Registered: 11-2003
| | Posted on Saturday, September 15, 2012 - 5:38 pm: |
|
check the battery connection
what don't kill you makes you stronger
|
