Copper Talk » Ask The Tech » Amplifiers » No swing on boomer amp « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderbolt
Posted on Saturday, September 13, 2003 - 9:48 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Ok,I am working on a boomer base amp 250 watt I think. Has 2 1446's in it. The problem is it has a dead key on high of only 40 watts and very little to no swing. Low and med is a little less dead key and only about a 10 watt swing. I have replaced both pills and still the same thing. I have hooked the amp up directly to another power supply and the same thing. So,not the power supply. Nothing looks burnt or bad. Tried more than one radio. What happened?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bigbob
Posted on Sunday, September 14, 2003 - 10:25 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I know this will sound stupid,but check to see if the coax is hooked up right ,make sure the antenna is hooked to the antenna side of amp,other than that it's to technical for me.Being in a hurry I've done this more than once on the same amp in the same day.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kc0gxz
Posted on Monday, September 15, 2003 - 4:05 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thunderbolt

Check the output into a dummyload. Not the antenna. And just for the heck of it, put a SWR meter between the radio and the load. I'm curious to know what the SWR is when the amp is turned on.

One of the possibilities of a low output could be that one of the 1446 pills has died and gone to 1446 pill heaven.

What kind of radio and with how much power are you driving this amp with and does your radio itself have much swing?

Inquiring minds want to know.

Jeff, kc0gxz.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xlaxx
Posted on Monday, September 15, 2003 - 8:42 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Hey T-Bolt-
I know you got better stuff in your closet. LOL Throw that coffee warmer in the trash and pull that other pair of snowshoes on. hahahahaha

Click on my profile, we're wavin' a hand!

XLAXX
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderbolt
Posted on Tuesday, September 16, 2003 - 8:22 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

LOL,xlaxx whats up! well this is something one of the guys brought to me so I am trying to figure this out. You know I dont have any use for these things other than to keep my door from swinging shut or my car from rolling backwards.Hehe. Anyway to answere the questions above I have dropped new pills in it and that wasnt it. Coax fittings are correct and SWR's are flat with the amp on. Dummy load has the same readings. I am somewhat of a tech and have been around a few radios and amps. As far as the radio, this came in this way but it really doesnt matter what radio I have it on it still has a 40 watt dead key and no swing. I have replaced the capacitor across the coil and it worked for about 3 seconds and pop the cap. So,back to staring at it again.I WILL figure it out eventually but help would make it faster. LOL. Thanks guys

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: