| Author |
Message |
    
Normjody100
| | Posted on Saturday, October 11, 2003 - 2:46 pm: | 
|
can anyone help me on the wireing code. my turner plus 3 has a red white shield and black. i want to wire it to a cobra 2000 gtl 5 pin jack |
Adshar64
| | Posted on Sunday, October 12, 2003 - 4:56 am: |
|
Mic wiring info in files section at
http://groups.yahoo.com/group/Cobra_2000/,http://groups.yahoo.com/group/Cobra_2000/ |
Gonzo
Junior Member
Username: Gonzo
Post Number: 17
Registered: 9-2004
| | Posted on Saturday, September 25, 2004 - 10:57 pm: |
|
I believe this should work
1..white
2..shield
3..red
4......
5.. black
Diagrams printed online showing wiring for this mike are incorrect.
There were 2 versions of Turner wiring, the above is for the older 3 wire Turner models with a shield.
-------------------------------
The below is for the later Turner models which used 5 wires and a shield
1..white
2..shield & red
3..black
4........
5..blue
yellow not used |
Yankee
Intermediate Member
Username: Yankee
Post Number: 307
Registered: 7-2003
| | Posted on Sunday, September 26, 2004 - 5:50 pm: |
|
To me it looks like that with the 6 wire Turners the red wire could go on pin 4, because pin 4 is the floating ground when using a 5 or 6 wire microphone, although it's strange that they would make the transmit wire blue. Because every other Turner the transmit wire is black, but of course that's Turner just trying to confuse things.
73, Carl CEF-357 |
|
