Copper Talk » Ask The Tech » Radios BASE » Galaxy Melaka Frequency Problem! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Rich
Posted on Tuesday, October 09, 2001 - 6:07 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
HI, I recently purchased a galaxy Melaka from copper, I did the mod and everything seemed fine but i started to notice that it recieves the same frequency twice on certain channels? Like i could switch from channel 17 to 18 and they are the same channel, If anyone one could help me i would be very greatful... Thanx 73's Rich
Top of pagePrevious messageNext messageBottom of page Link to this message

307
Posted on Wednesday, October 10, 2001 - 7:06 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Sure , The problem is that the "LSB" (least significant BIT) and the next "BIT" in line are shorted...In easy terms , you have a solder splash on two pins on the PLL. Look close at the solder side of the main board near the PLL chip..You will most likely see a solder splash. Let me know..
Top of pagePrevious messageNext messageBottom of page Link to this message

Rich
Posted on Wednesday, October 10, 2001 - 10:42 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
I'll Check that out and let you Know Thanx 307..73's Rich

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: