| Author |
Message |
    
67gto
| | Posted on Sunday, November 09, 2003 - 11:17 am: | 
|
Hello,
Is it possible to use this mic with a 2980?
If so could you please tell me the wiring. It has 7 wires and I have tried all moring and cannot get it to work.
THANKS,
G T O |
Scrapiron63
| | Posted on Sunday, November 09, 2003 - 12:32 pm: |
|
I believe this will work for the 2980:
1. shield
2. yellow
3. black
4. n/c |
67gto
| | Posted on Sunday, November 09, 2003 - 2:41 pm: |
|
Scrapiron63 - Thanks but that did not work. From the info I got off the net that is what I thought it would be but it will not key.
THANKS AGAIN
G T O |
Scrapiron63
| | Posted on Sunday, November 09, 2003 - 6:10 pm: |
|
GTO, there's another ground wire, don't know what color it is, but it probably needs to go on Number 1 with the shield. You might try the other wires till you find it. |
67gto
| | Posted on Sunday, November 09, 2003 - 8:16 pm: |
|
Hi
I found the other wire. It is the green wire. When connected the mic will transmit with great audio but it will stay keyed even if I do not have the key down. I tried to connect the other wires one at a time to pin 4 to see if it would unkey and had no luck. This is strange because I have wired tons of mics in the past and never had this problem.
THANKS AGAIN
G T O |
Kc0gxz
| | Posted on Monday, November 10, 2003 - 7:07 pm: |
|
67gto
Here is the original wiring for the MC-60 Kenwood Mic. With this, at least you will know what color wire is for what.
1- Yellow-Audio
2- Black-Standby
3- Blue-Down Button
4- Red-Up Button
5- Gray-No Connection
6- Orange-No Connection
7- Shield
8- Green-Ground
-----------------------------------
At least Pins 1 and 7 will get you in the ball park. I hope this may help you.
Jeff, kc0gxz. |
|
